Welcome to DSSC’s documentation!

Contents:

• 1. Revisions
• 2. Abstract
• 3. Vacuum and cooling
  • 3.1. Checking if the detector is in vacuum and at room temperature
  • 3.2. Cooling down the detector
• 4. Powering ON the DSSC detector and sending data to DAQ
  • 4.1. DSSC setup for data taking
  • 4.2. Switching ON the in-vacuum electronics up to ASICs
  • 4.3. Configuring the detector ASICs
  • 4.4. Powering up the source voltages and the high voltage channels
• 5. DAQ configuration and data taking
  • 5.1. Taking dark data runs
• 6. DSSC Motion System
  • 6.1. The DSSC Motion Mechanics
    • 6.1.1. Understanding Opening and Closing the aperture
  • 6.2. Operation Instruction
    • 6.2.1. Powering and restartting encoders and motors
    • 6.2.2. Opening motion system log file
    • 6.2.3. Checking positional state of the quadrants
• 7. Powering OFF the DSSC detector
• 8. Troubleshooting
  • 8.1. What to do when
  • 8.2. Online preview not updating
  • 8.3. Frames getting IDs up to 810
  • 8.4. Restarting the DAQ
• 9. DSSC configuration files for SCS instrument
  • 9.1. 2.25 MHz rate
  • 9.2. 4.5 MHz repetition rate, 50 ns integration time
• 10. DSSC configuration files for the SQS instrument
• 11. DSSC Configuraiton Files Generation
  • 11.1. Environment Setup
  • 11.2. Config file generation
• 12. SCS Expert Startup
  • 12.1. Chiller
    • 12.1.1. Bypass
    • 12.1.2. Normal operation settings
  • 12.2. MPOD
  • 12.3. AON
  • 12.4. SIB