Read the Docs build information Build id: 19999 Project: agipd-manual-mid Version: latest Commit: cd65a44541c93b999067463df20a93e10a83f6f2 Date: 2020-10-22T12:05:11.717021Z State: finished Success: True [rtd-command-info] start-time: 2020-10-22T17:05:20.772000Z, end-time: 2020-10-22T17:05:36.590000Z, duration: 15, exit-code: 0 python3 -mvirtualenv --no-site-packages --no-download /user_builds/agipd-manual-mid/envs/latest Using base prefix '/usr' New python executable in /user_builds/agipd-manual-mid/envs/latest/bin/python3 Not overwriting existing python script /user_builds/agipd-manual-mid/envs/latest/bin/python (you must use /user_builds/agipd-manual-mid/envs/latest/bin/python3) Installing setuptools, pip, wheel...done. [rtd-command-info] start-time: 2020-10-22T17:05:36.654000Z, end-time: 2020-10-22T17:06:05.843000Z, duration: 29, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/pip install --use-wheel -U --cache-dir /user_builds/agipd-manual-mid/.cache/pip sphinx==1.3.5 Pygments==2.1.3 setuptools==20.1.1 docutils==0.12 mkdocs==0.15.0 PyYAML==5.2 mock==1.0.1 pillow==2.6.1 git+https://github.com/rtfd/readthedocs-sphinx-ext.git@0.6-alpha#egg=readthedocs-sphinx-ext sphinx-rtd-theme==0.1.9 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.5.4 recommonmark==0.1.1 Requirement already up-to-date: sphinx==1.3.5 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: Pygments==2.1.3 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Collecting setuptools==20.1.1 Using cached https://files.pythonhosted.org/packages/e8/82/3b5455f74bf9ac0757d09c625b7741e6fc284d7519cffc3babb6c5173cf5/setuptools-20.1.1-py2.py3-none-any.whl Requirement already up-to-date: docutils==0.12 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: mkdocs==0.15.0 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: PyYAML==5.2 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: mock==1.0.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: pillow==2.6.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Collecting readthedocs-sphinx-ext from git+https://github.com/rtfd/readthedocs-sphinx-ext.git@0.6-alpha#egg=readthedocs-sphinx-ext Cloning https://github.com/rtfd/readthedocs-sphinx-ext.git (to 0.6-alpha) to /tmp/pip-build-4dxwzxd3/readthedocs-sphinx-ext Requirement already up-to-date: sphinx-rtd-theme==0.1.9 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: alabaster!=0.7.5,<0.8,>=0.7 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: commonmark==0.5.4 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: recommonmark==0.1.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages Requirement already up-to-date: Jinja2>=2.3 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from sphinx==1.3.5) Requirement already up-to-date: snowballstemmer>=1.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from sphinx==1.3.5) Requirement already up-to-date: six>=1.4 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from sphinx==1.3.5) Requirement already up-to-date: babel!=2.0,>=1.3 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from sphinx==1.3.5) Requirement already up-to-date: mkdocs-bootstrap>=0.1.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from mkdocs==0.15.0) Collecting livereload>=2.3.2 (from mkdocs==0.15.0) Downloading https://files.pythonhosted.org/packages/bd/60/6640b819e858562ef6684abac60593b7369fe0a8a064df426d3ab0ab894d/livereload-2.6.3.tar.gz Ignoring tornado: markers 'python_version == "2.7"' don't match your environment Requirement already up-to-date: Markdown>=2.3.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from mkdocs==0.15.0) Requirement already up-to-date: tornado>=4.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from mkdocs==0.15.0) Requirement already up-to-date: mkdocs-bootswatch>=0.1.0 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from mkdocs==0.15.0) Requirement already up-to-date: click>=4.0 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from mkdocs==0.15.0) Requirement already up-to-date: requests in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from readthedocs-sphinx-ext) Requirement already up-to-date: nilsimsa>=0.3.7 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from readthedocs-sphinx-ext) Requirement already up-to-date: MarkupSafe>=0.23 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from Jinja2>=2.3->sphinx==1.3.5) Requirement already up-to-date: pytz>=2015.7 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from babel!=2.0,>=1.3->sphinx==1.3.5) Requirement already up-to-date: backports-abc>=0.4 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from tornado>=4.1->mkdocs==0.15.0) Requirement already up-to-date: idna<2.9,>=2.5 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from requests->readthedocs-sphinx-ext) Requirement already up-to-date: urllib3<1.25,>=1.21.1 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from requests->readthedocs-sphinx-ext) Requirement already up-to-date: chardet<3.1.0,>=3.0.2 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from requests->readthedocs-sphinx-ext) Requirement already up-to-date: certifi>=2017.4.17 in /user_builds/agipd-manual-mid/envs/latest/lib/python3.4/site-packages (from requests->readthedocs-sphinx-ext) Building wheels for collected packages: livereload Running setup.py bdist_wheel for livereload: started Running setup.py bdist_wheel for livereload: finished with status 'done' Stored in directory: /user_builds/agipd-manual-mid/.cache/pip/wheels/f2/a1/fa/00775311351a48f78b4a0e40588eefdd6f2731cc8115d6957d Successfully built livereload Installing collected packages: setuptools, readthedocs-sphinx-ext, livereload Found existing installation: setuptools 28.8.0 Uninstalling setuptools-28.8.0: Successfully uninstalled setuptools-28.8.0 Found existing installation: readthedocs-sphinx-ext 0.5.4 Uninstalling readthedocs-sphinx-ext-0.5.4: Successfully uninstalled readthedocs-sphinx-ext-0.5.4 Running setup.py install for readthedocs-sphinx-ext: started Running setup.py install for readthedocs-sphinx-ext: finished with status 'done' Found existing installation: livereload 2.6.2 Uninstalling livereload-2.6.2: Successfully uninstalled livereload-2.6.2 Successfully installed livereload-2.6.3 readthedocs-sphinx-ext-0.5.4 setuptools-20.1.1 You are using pip version 9.0.1, however version 20.2.4 is available. You should consider upgrading via the 'pip install --upgrade pip' command. [rtd-command-info] start-time: 2020-10-22T17:06:07.327000Z, end-time: 2020-10-22T17:06:07.345000Z, duration: 0, exit-code: 0 cat conf.py # -*- coding: utf-8 -*- # # AGIPD User Manual documentation build configuration file, created by # sphinx-quickstart on Mon Apr 10 12:38:08 2017. # # This file is execfile()d with the current directory set to its # containing dir. # # Note that not all possible configuration values are present in this # autogenerated file. # # All configuration values have a default; values that are commented out # serve to show the default. import sys import os # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. #sys.path.insert(0, os.path.abspath('.')) # -- General configuration ------------------------------------------------ # If your documentation needs a minimal Sphinx version, state it here. #needs_sphinx = '1.0' import sys import os html_theme = 'sphinx_rtd_theme' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ 'sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo', 'sphinx.ext.mathjax', 'sphinx.ext.ifconfig', ] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # The suffix of source filenames. source_suffix = '.rst' # The encoding of source files. #source_encoding = 'utf-8-sig' # The master toctree document. master_doc = 'index' # General information about the project. project = u'AGIPD at MID User Manual' copyright = u'2017, European XFEL Detector Group' authors = u'Jolanta Sztuk-Dambietz, Natascha Raab' # The version info for the project you're documenting, acts as replacement for # |version| and |release|, also used in various other places throughout the # built documents. # # The short X.Y version. version = '0.4' # The full version, including alpha/beta/rc tags. release = '1.0 alpha' # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. #language = None # There are two options for replacing |today|: either, you set today to some # non-false value, then it is used: #today = '' # Else, today_fmt is used as the format for a strftime call. #today_fmt = '%B %d, %Y' # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. exclude_patterns = [] # The reST default role (used for this markup: `text`) to use for all # documents. #default_role = None # If true, '()' will be appended to :func: etc. cross-reference text. #add_function_parentheses = True # If true, the current module name will be prepended to all description # unit titles (such as .. function::). #add_module_names = True # If true, sectionauthor and moduleauthor directives will be shown in the # output. They are ignored by default. show_authors = True # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'sphinx' # A list of ignored prefixes for module index sorting. #modindex_common_prefix = [] # If true, keep warnings as "system message" paragraphs in the built documents. #keep_warnings = False # If true, references (figures) should be numbered and refered to by number numfig = True # -- Options for HTML output ---------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. html_theme = 'default' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. #html_theme_options = {} # Add any paths that contain custom themes here, relative to this directory. #html_theme_path = [] # The name for this set of Sphinx documents. If None, it defaults to # " v documentation". #html_title = None # A shorter title for the navigation bar. Default is the same as html_title. #html_short_title = None # The name of an image file (relative to this directory) to place at the top # of the sidebar. #html_logo = None # The name of an image file (within the static path) to use as favicon of the # docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. #html_favicon = None # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] # Add any extra paths that contain custom files (such as robots.txt or # .htaccess) here, relative to this directory. These files are copied # directly to the root of the documentation. #html_extra_path = [] # If not '', a 'Last updated on:' timestamp is inserted at every page bottom, # using the given strftime format. #html_last_updated_fmt = '%b %d, %Y' # If true, SmartyPants will be used to convert quotes and dashes to # typographically correct entities. #html_use_smartypants = True # Custom sidebar templates, maps document names to template names. #html_sidebars = {} # Additional templates that should be rendered to pages, maps page names to # template names. #html_additional_pages = {} # If false, no module index is generated. #html_domain_indices = True # If false, no index is generated. #html_use_index = True # If true, the index is split into individual pages for each letter. #html_split_index = False # If true, links to the reST sources are added to the pages. #html_show_sourcelink = True # If true, "Created using Sphinx" is shown in the HTML footer. Default is True. #html_show_sphinx = True # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. #html_show_copyright = True # If true, an OpenSearch description file will be output, and all pages will # contain a tag referring to it. The value of this option must be the # base URL from which the finished HTML is served. #html_use_opensearch = '' # This is the file name suffix for HTML files (e.g. ".xhtml"). #html_file_suffix = None # Output file base name for HTML help builder. htmlhelp_basename = 'SPBAGIPDUserManualdoc' # -- Options for LaTeX output --------------------------------------------- latex_elements = { # The paper size ('letterpaper' or 'a4paper'). #'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). #'pointsize': '10pt', # Additional stuff for the LaTeX preamble. #'preamble': '', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, # author, documentclass [howto, manual, or own class]). latex_documents = [ ('index', 'MID-AGIPD_UserManual.tex', u'MID AGIPD User Manual Documentation', u'European XFEL Detector Group', 'manual'), ] # The name of an image file (relative to this directory) to place at the top of # the title page. #latex_logo = None # For "manual" documents, if this is true, then toplevel headings are parts, # not chapters. #latex_use_parts = False # If true, show page references after internal links. #latex_show_pagerefs = False # If true, show URL addresses after external links. #latex_show_urls = False # Documents to append as an appendix to all manuals. #latex_appendices = [] # If false, no module index is generated. #latex_domain_indices = True # -- Options for manual page output --------------------------------------- # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ ('index', 'agipdusermanual', u'AGIPD User Manual Documentation', [u'European XFEL Detector Group'], 1) ] # If true, show URL addresses after external links. #man_show_urls = False # -- Options for Texinfo output ------------------------------------------- # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ ('index', 'MIDAGIPDUserManual', u'MIDAGIPD User Manual Documentation', u'European XFEL Detector Group', 'MIDAGIPDUserManual', 'One line description of project.', 'Miscellaneous'), ] # Documents to append as an appendix to all manuals. #texinfo_appendices = [] # If false, no module index is generated. #texinfo_domain_indices = True # How to display URL addresses: 'footnote', 'no', or 'inline'. #texinfo_show_urls = 'footnote' # If true, do not generate a @detailmenu in the "Top" node's menu. #texinfo_no_detailmenu = False # Example configuration for intersphinx: refer to the Python standard library. intersphinx_mapping = {'http://docs.python.org/': None} ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/master/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # import sys import os.path from six import string_types from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix else: SUFFIX = source_suffix[0] else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') html_static_path.append('/rtd_root/readthedocs/templates/sphinx/_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = False if 'html_theme' in globals(): if html_theme in ['default']: # Allow people to bail with a hack of having an html_style if not 'html_style' in globals(): import sphinx_rtd_theme html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(sphinx_rtd_theme.get_html_theme_path()) else: html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] using_rtd_theme = True else: import sphinx_rtd_theme html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(sphinx_rtd_theme.get_html_theme_path()) else: html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] using_rtd_theme = True if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.org/websupport' if 'http' not in settings.MEDIA_URL: websupport2_static_url = '/static/' else: websupport2_static_url = '/media//static' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'MEDIA_URL': "/media/", 'PRODUCTION_DOMAIN': "exflrtd.desy.de", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("pdf", "//exflrtd.desy.de/projects/agipd-manual-mid/downloads/pdf/latest/"), ("htmlzip", "//exflrtd.desy.de/projects/agipd-manual-mid/downloads/htmlzip/latest/"), ("epub", "//exflrtd.desy.de/projects/agipd-manual-mid/downloads/epub/latest/"), ], 'subprojects': [ ], 'slug': 'agipd-manual-mid', 'name': u'AGIPD Manual MID', 'rtd_language': u'en', 'canonical_url': 'http://exflrtd.desy.de/docs/agipd-manual-mid/en/latest/', 'analytics_code': '', 'single_version': False, 'conf_py_path': '/source/', 'api_host': 'https://readthedocs.org', 'github_user': 'None', 'github_repo': 'None', 'github_version': 'master', 'display_github': False, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'master', 'display_bitbucket': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-1', 'commit': 'cd65a445', } if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): extensions.append("readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] [rtd-command-info] start-time: 2020-10-22T17:06:07.555000Z, end-time: 2020-10-22T17:06:24.411000Z, duration: 16, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/sphinx-build -T -E -b readthedocs -d _build/doctrees-readthedocs -D language=en . _build/html Running Sphinx v1.3.5 making output directory... loading translations [en]... done loading intersphinx inventory from http://docs.python.org/objects.inv... building [mo]: targets for 0 po files that are out of date building [readthedocs]: targets for 6 source files that are out of date updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] OCD_guidelines reading sources... [ 33%] index reading sources... [ 50%] introduction reading sources... [ 66%] starting_detector_mid reading sources... [ 83%] stopping_detector reading sources... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:13: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:16: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:17: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:29: ERROR: Unexpected indentation. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:30: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:33: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:34: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:36: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:37: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:39: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:41: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:42: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:43: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:44: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:47: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:48: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:50: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:51: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:52: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:53: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:54: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:55: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:59: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:60: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:63: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:65: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:74: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/index.rst:11: WARNING: toctree contains reference to nonexisting document 'appendix' /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:52: ERROR: Figure caption must be a paragraph or empty comment. .. figure:: ./images/screenshots/AGIPD_overviewMID2020.png :width: 110 % The main overview scene for AGIPD /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:106: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:179: ERROR: Unknown directive type "coment". .. coment:: Currently the cooling cycle of the Julabo chiller is still leaky. Therefore in the beginning of a shift it should be checked in the rack room, whether the chiller displayes warning 40 (liquid level too low) and has to be refilled. This warning will not appear in Karabo, one has to go to the chiller to check! To refill the chiller the detector has to be warmed up. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:365: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:509: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:542: WARNING: Literal block expected; none found. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:608: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:None: WARNING: image file not readable: ./images/screenshots/AGIPD_overviewMID2020.png /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:57: WARNING: Inline emphasis start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:78: ERROR: Unknown directive type "comment". .. comment:: (see picture below) .. _u901: .. figure:: ./images/screenshots/mpod_u901_trip_.png /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:146: ERROR: Unknown directive type "coment". .. coment:: Automatic power procedure failed during powering of the asics -------------------------------------------------------------- If the automatic procedure fails and goes to the state 'unknown' when trying to switch on the asics: * check the error displayed by the procedure: * if the observed error is: Failed on task run_det because: Calling slot "start" not allowed in state "State.OFF" 1. Reinstante SPB_IRU_AGIPD1M1/MDL/FPGA_COMP. 2. Disconnect, reconnect and reset, 3. Configure the detector again 4. Power the Asics manually and push data /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:260: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:262: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:264: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 16%] OCD_guidelines writing output... [ 33%] index writing output... [ 50%] introduction writing output... [ 66%] starting_detector_mid writing output... [ 83%] stopping_detector writing output... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:326: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:338: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) generating indices... genindex writing additional pages... search copying images... [ 10%] ./images/configtablemid.png copying images... [ 20%] ./images/screenshots/agipd_combined_control2020.png copying images... [ 30%] ./images/screenshots/Screenshot_h5view.png copying images... [ 40%] ./images/agipd_modules.png copying images... [ 50%] ./images/huber_wing_chiller.jpg copying images... [ 60%] ./images/screenshots/agipd-power_23.02.png copying images... [ 70%] ./images/Huber_display.jpg copying images... [ 80%] ./images/screenshots/Screenshot_tags_.png copying images... [ 90%] ./images/AGIPDinSAXposition.jpg copying images... [100%] ./images/agipd_naming.png copying static files... WARNING: html_static_path entry '/user_builds/agipd-manual-mid/checkouts/latest/source/_static' does not exist done copying extra files... done dumping search index in English (code: en) ... done dumping object inventory... done build succeeded, 57 warnings. Copying readthedocs-dynamic-include.js_t... done Copying readthedocs-data.js_t... done Copying searchtools.js_t... done [rtd-command-info] start-time: 2020-10-22T17:06:28.571000Z, end-time: 2020-10-22T17:06:35.921000Z, duration: 7, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/sphinx-build -T -b json -d _build/doctrees-json -D language=en . _build/json Running Sphinx v1.3.5 making output directory... loading translations [en]... done loading pickled environment... not yet created loading intersphinx inventory from http://docs.python.org/objects.inv... building [mo]: targets for 0 po files that are out of date building [json]: targets for 6 source files that are out of date updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] OCD_guidelines reading sources... [ 33%] index reading sources... [ 50%] introduction reading sources... [ 66%] starting_detector_mid reading sources... [ 83%] stopping_detector reading sources... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:13: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:16: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:17: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:29: ERROR: Unexpected indentation. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:30: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:33: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:34: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:36: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:37: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:39: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:41: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:42: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:43: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:44: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:47: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:48: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:50: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:51: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:52: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:53: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:54: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:55: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:59: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:60: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:63: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:65: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:74: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/index.rst:11: WARNING: toctree contains reference to nonexisting document 'appendix' /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:52: ERROR: Figure caption must be a paragraph or empty comment. .. figure:: ./images/screenshots/AGIPD_overviewMID2020.png :width: 110 % The main overview scene for AGIPD /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:106: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:179: ERROR: Unknown directive type "coment". .. coment:: Currently the cooling cycle of the Julabo chiller is still leaky. Therefore in the beginning of a shift it should be checked in the rack room, whether the chiller displayes warning 40 (liquid level too low) and has to be refilled. This warning will not appear in Karabo, one has to go to the chiller to check! To refill the chiller the detector has to be warmed up. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:365: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:509: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:542: WARNING: Literal block expected; none found. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:608: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:None: WARNING: image file not readable: ./images/screenshots/AGIPD_overviewMID2020.png /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:57: WARNING: Inline emphasis start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:78: ERROR: Unknown directive type "comment". .. comment:: (see picture below) .. _u901: .. figure:: ./images/screenshots/mpod_u901_trip_.png /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:146: ERROR: Unknown directive type "coment". .. coment:: Automatic power procedure failed during powering of the asics -------------------------------------------------------------- If the automatic procedure fails and goes to the state 'unknown' when trying to switch on the asics: * check the error displayed by the procedure: * if the observed error is: Failed on task run_det because: Calling slot "start" not allowed in state "State.OFF" 1. Reinstante SPB_IRU_AGIPD1M1/MDL/FPGA_COMP. 2. Disconnect, reconnect and reset, 3. Configure the detector again 4. Power the Asics manually and push data /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:260: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:262: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:264: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 16%] OCD_guidelines writing output... [ 33%] index writing output... [ 50%] introduction writing output... [ 66%] starting_detector_mid writing output... [ 83%] stopping_detector writing output... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:326: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:338: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) generating indices... genindex writing additional pages... search copying images... [ 10%] ./images/configtablemid.png copying images... [ 20%] ./images/screenshots/agipd-power_23.02.png copying images... [ 30%] ./images/screenshots/Screenshot_tags_.png copying images... [ 40%] ./images/agipd_modules.png copying images... [ 50%] ./images/huber_wing_chiller.jpg copying images... [ 60%] ./images/agipd_naming.png copying images... [ 70%] ./images/AGIPDinSAXposition.jpg copying images... [ 80%] ./images/screenshots/agipd_combined_control2020.png copying images... [ 90%] ./images/Huber_display.jpg copying images... [100%] ./images/screenshots/Screenshot_h5view.png copying static files... WARNING: html_static_path entry '/user_builds/agipd-manual-mid/checkouts/latest/source/_static' does not exist done copying extra files... done dumping search index in English (code: en) ... done dumping object inventory... done build succeeded, 57 warnings. [rtd-command-info] start-time: 2020-10-22T17:06:37.180000Z, end-time: 2020-10-22T17:06:44.634000Z, duration: 7, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/sphinx-build -T -b readthedocssinglehtmllocalmedia -d _build/doctrees-readthedocssinglehtmllocalmedia -D language=en . _build/localmedia Running Sphinx v1.3.5 making output directory... loading translations [en]... done loading pickled environment... not yet created loading intersphinx inventory from http://docs.python.org/objects.inv... building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] OCD_guidelines reading sources... [ 33%] index reading sources... [ 50%] introduction reading sources... [ 66%] starting_detector_mid reading sources... [ 83%] stopping_detector reading sources... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:13: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:16: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:17: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:29: ERROR: Unexpected indentation. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:30: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:33: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:34: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:36: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:37: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:39: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:41: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:42: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:43: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:44: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:47: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:48: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:50: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:51: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:52: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:53: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:54: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:55: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:59: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:60: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:63: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:65: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:74: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/index.rst:11: WARNING: toctree contains reference to nonexisting document 'appendix' /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:52: ERROR: Figure caption must be a paragraph or empty comment. .. figure:: ./images/screenshots/AGIPD_overviewMID2020.png :width: 110 % The main overview scene for AGIPD /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:106: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:179: ERROR: Unknown directive type "coment". .. coment:: Currently the cooling cycle of the Julabo chiller is still leaky. Therefore in the beginning of a shift it should be checked in the rack room, whether the chiller displayes warning 40 (liquid level too low) and has to be refilled. This warning will not appear in Karabo, one has to go to the chiller to check! To refill the chiller the detector has to be warmed up. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:365: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:509: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:542: WARNING: Literal block expected; none found. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:608: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:None: WARNING: image file not readable: ./images/screenshots/AGIPD_overviewMID2020.png /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:57: WARNING: Inline emphasis start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:78: ERROR: Unknown directive type "comment". .. comment:: (see picture below) .. _u901: .. figure:: ./images/screenshots/mpod_u901_trip_.png /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:146: ERROR: Unknown directive type "coment". .. coment:: Automatic power procedure failed during powering of the asics -------------------------------------------------------------- If the automatic procedure fails and goes to the state 'unknown' when trying to switch on the asics: * check the error displayed by the procedure: * if the observed error is: Failed on task run_det because: Calling slot "start" not allowed in state "State.OFF" 1. Reinstante SPB_IRU_AGIPD1M1/MDL/FPGA_COMP. 2. Disconnect, reconnect and reset, 3. Configure the detector again 4. Power the Asics manually and push data /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:260: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:262: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:264: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done assembling single document... introduction starting_detector_mid stopping_detector troubleshooting OCD_guidelines /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:326: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:338: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) writing... done writing additional files... copying images... [ 10%] ./images/screenshots/agipd-power_23.02.png copying images... [ 20%] ./images/agipd_naming.png copying images... [ 30%] ./images/agipd_modules.png copying images... [ 40%] ./images/configtablemid.png copying images... [ 50%] ./images/huber_wing_chiller.jpg copying images... [ 60%] ./images/AGIPDinSAXposition.jpg copying images... [ 70%] ./images/screenshots/agipd_combined_control2020.png copying images... [ 80%] ./images/Huber_display.jpg copying images... [ 90%] ./images/screenshots/Screenshot_tags_.png copying images... [100%] ./images/screenshots/Screenshot_h5view.png copying static files... WARNING: html_static_path entry '/user_builds/agipd-manual-mid/checkouts/latest/source/_static' does not exist done copying extra files... done dumping object inventory... done build succeeded, 57 warnings. [rtd-command-info] start-time: 2020-10-22T17:06:45.555000Z, end-time: 2020-10-22T17:06:51.474000Z, duration: 5, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/sphinx-build -b latex -D language=en -d _build/doctrees . _build/latex Running Sphinx v1.3.5 making output directory... loading translations [en]... done loading pickled environment... not yet created loading intersphinx inventory from http://docs.python.org/objects.inv... building [mo]: targets for 0 po files that are out of date building [latex]: all documents updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] OCD_guidelines reading sources... [ 33%] index reading sources... [ 50%] introduction reading sources... [ 66%] starting_detector_mid reading sources... [ 83%] stopping_detector reading sources... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:13: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:16: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:17: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:29: ERROR: Unexpected indentation. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:30: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:33: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:34: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:36: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:37: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:39: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:41: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:42: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:43: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:44: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:47: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:48: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:50: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:51: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:52: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:53: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:54: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:55: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:59: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:60: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:63: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:65: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:74: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/index.rst:11: WARNING: toctree contains reference to nonexisting document 'appendix' /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:52: ERROR: Figure caption must be a paragraph or empty comment. .. figure:: ./images/screenshots/AGIPD_overviewMID2020.png :width: 110 % The main overview scene for AGIPD /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:106: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:179: ERROR: Unknown directive type "coment". .. coment:: Currently the cooling cycle of the Julabo chiller is still leaky. Therefore in the beginning of a shift it should be checked in the rack room, whether the chiller displayes warning 40 (liquid level too low) and has to be refilled. This warning will not appear in Karabo, one has to go to the chiller to check! To refill the chiller the detector has to be warmed up. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:365: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:509: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:542: WARNING: Literal block expected; none found. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:608: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:None: WARNING: image file not readable: ./images/screenshots/AGIPD_overviewMID2020.png /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:57: WARNING: Inline emphasis start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:78: ERROR: Unknown directive type "comment". .. comment:: (see picture below) .. _u901: .. figure:: ./images/screenshots/mpod_u901_trip_.png /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:146: ERROR: Unknown directive type "coment". .. coment:: Automatic power procedure failed during powering of the asics -------------------------------------------------------------- If the automatic procedure fails and goes to the state 'unknown' when trying to switch on the asics: * check the error displayed by the procedure: * if the observed error is: Failed on task run_det because: Calling slot "start" not allowed in state "State.OFF" 1. Reinstante SPB_IRU_AGIPD1M1/MDL/FPGA_COMP. 2. Disconnect, reconnect and reset, 3. Configure the detector again 4. Power the Asics manually and push data /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:260: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:262: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:264: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done processing MID-AGIPD_UserManual.tex... index introduction starting_detector_mid stopping_detector troubleshooting OCD_guidelines resolving references... /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:326: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:338: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) writing... done copying images... ./images/agipd_naming.png ./images/huber_wing_chiller.jpg ./images/Huber_display.jpg ./images/configtablemid.png ./images/AGIPDinSAXposition.jpg ./images/screenshots/Screenshot_h5view.png ./images/screenshots/agipd-power_23.02.png ./images/agipd_modules.png ./images/screenshots/agipd_combined_control2020.png ./images/screenshots/Screenshot_tags_.png copying TeX support files... done build succeeded, 56 warnings. [rtd-command-info] start-time: 2020-10-22T17:06:51.546000Z, end-time: 2020-10-22T17:06:57.181000Z, duration: 5, exit-code: 0 pdflatex -interaction=nonstopmode /user_builds/agipd-manual-mid/checkouts/latest/source/_build/latex/MID-AGIPD_UserManual.tex This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (/user_builds/agipd-manual-mid/checkouts/latest/source/_build/latex/MID-AGIPD_U serManual.tex LaTeX2e <2014/05/01> Babel <3.9l> and hyphenation patterns for 2 languages loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2009/06/02 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (./fncychap.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty Style option: `fancybox' v1.4 <2010/05/15> (tvz) ) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (./tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg) (/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty))) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz) (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty )) (/usr/share/texlive/texmf-dist/tex/latex/threeparttable/threeparttable.sty) (/usr/share/texlive/texmf-dist/tex/latex/mdwtools/footnote.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/graphics.cfg))) (/usr/share/texlive/texmf-dist/tex/generic/pdftex/pdfcolor.tex) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) Package hyperref Message: Driver (autodetected): hpdftex. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (/usr/share/texlive/texmf-dist/tex/latex/caption/newfloat.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty)) (/usr/share/texlive/texmf-dist/tex/latex/multirow/multirow.sty) (/usr/share/texlive/texmf-dist/tex/latex/eqparbox/eqparbox.sty (/usr/share/texlive/texmf-dist/tex/latex/environ/environ.sty (/usr/share/texlive/texmf-dist/tex/latex/trimspaces/trimspaces.sty))) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty) Writing index file MID-AGIPD_UserManual.idx No file MID-AGIPD_UserManual.aux. (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) Underfull \hbox (badness 10000) in paragraph at lines 133--133 (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] Adding blank page after the table of contents. [1] [2] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) Underfull \hbox (badness 10000) in paragraph at lines 181--182 []\T1/ptm/m/n/10 Mpod power sup-plies for low and high volt-age of the de-tec-t or: Underfull \hbox (badness 10000) in paragraph at lines 181--182 [][]\T1/ptm/m/n/10 https://docs.xfel.eu/share/page/site/agipd/document-details? nodeRef=workspace://SpacesStore/3dfffbe2- Underfull \hbox (badness 10000) in paragraph at lines 187--188 []\T1/ptm/m/n/10 Julabo Chiller (in-vacuum cool-ing): [][]https://docs.xfel.eu/ share/page/site/agipd/document- [3 <./AGIPDinSAXposition.jpg>] Overfull \hbox (186.61783pt too wide) in paragraph at lines 196--197 []\T1/ptm/m/n/10 Clock & Con-trol: [][]https://docs.xfel.eu/alfresco/webdav/Sit es/advancedElectronics/documentLibrary/FPGA/Clock%20and%20Control/clockControlP roject.pdf[][] Overfull \hbox (13.89911pt too wide) in paragraph at lines 214--216 \T1/ptm/m/n/10 There is an elec-tronic log-book for the MID-AGIPD de-tec-tor: [ ][]https://in.xfel.eu/elog/1+MPix+AGIPD+Detector+for+MID/[][] LaTeX Warning: Hyper reference `introduction:fignaming' on page 4 undefined on input line 225. LaTeX Warning: Reference `introduction:fignaming' on page 4 undefined on input line 225. LaTeX Warning: Hyper reference `introduction:fignaming' on page 4 undefined on input line 226. LaTeX Warning: Reference `introduction:fignaming' on page 4 undefined on input line 226. [4] [5 <./agipd_naming.png>] LaTeX Warning: Hyper reference `introduction:figmodulsandnodes' on page 6 undef ined on input line 283. LaTeX Warning: Reference `introduction:figmodulsandnodes' on page 6 undefined o n input line 283. [6 <./agipd_modules.png>] Chapter 2. LaTeX Warning: Hyper reference `introduction:figscenexample' on page 7 undefine d on input line 316. LaTeX Warning: Reference `introduction:figscenexample' on page 7 undefined on i nput line 316. [7 <./configtablemid.png>] LaTeX Warning: Hyper reference `introduction:figscenexample' on page 8 undefine d on input line 370. LaTeX Warning: Reference `introduction:figscenexample' on page 8 undefined on i nput line 370. LaTeX Warning: Hyper reference `introduction:figmodulsandnodes' on page 8 undef ined on input line 394. LaTeX Warning: Reference `introduction:figmodulsandnodes' on page 8 undefined o n input line 394. [8] Chapter 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) LaTeX Warning: Hyper reference `starting_detector_mid:figoverview' on page 9 un defined on input line 459. LaTeX Warning: Reference `starting_detector_mid:figoverview' on page 9 undefine d on input line 459. LaTeX Warning: File `{./images/screenshots/AGIPD_overviewMID2020}.png' not foun d on input line 463. ! Package pdftex.def Error: File `./images/screenshots/AGIPD_overviewMID2020.pn g' not found. See the pdftex.def package documentation for explanation. Type H for immediate help. ... l.463 ...s/screenshots/AGIPD_overviewMID2020}.png} Overfull \hbox (46.97836pt too wide) in paragraph at lines 463--464 [][] [9] [10] LaTeX Warning: Hyper reference `introduction:figscenexample' on page 11 undefin ed on input line 514. LaTeX Warning: Reference `introduction:figscenexample' on page 11 undefined on input line 514. LaTeX Warning: Hyper reference `starting_detector_mid:figcombi' on page 11 unde fined on input line 519. LaTeX Warning: Reference `starting_detector_mid:figcombi' on page 11 undefined on input line 519. LaTeX Warning: Hyper reference `starting_detector_mid:automatic-power' on page 11 undefined on input line 530. [11 <./agipd_combined_control2020.png>] LaTeX Warning: Hyper reference `starting_detector_mid:manual-power' on page 12 undefined on input line 554. LaTeX Warning: Hyper reference `starting_detector_mid:figoverview' on page 12 u ndefined on input line 564. LaTeX Warning: Reference `starting_detector_mid:figoverview' on page 12 undefin ed on input line 564. LaTeX Warning: Hyper reference `introduction:figscenexample' on page 12 undefin ed on input line 572. LaTeX Warning: Reference `introduction:figscenexample' on page 12 undefined on input line 572. [12 <./huber_wing_chiller.jpg>] [13 <./Huber_display.jp g>] [14] LaTeX Warning: Hyper reference `starting_detector_mid:figmpodfeedback' on page 15 undefined on input line 744. LaTeX Warning: Reference `starting_detector_mid:figmpodfeedback' on page 15 und efined on input line 744. [15] [16 <./agipd-power_23.02.png>] LaTeX Warning: Hyper reference `introduction:figmodulsandnodes' on page 17 unde fined on input line 839. LaTeX Warning: Reference `introduction:figmodulsandnodes' on page 17 undefined on input line 839. [17] [18] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [19] [20] LaTeX Warning: Hyper reference `starting_detector_mid:data-check' on page 21 un defined on input line 1132. LaTeX Warning: Hyper reference `starting_detector_mid:figoverview' on page 21 u ndefined on input line 1184. LaTeX Warning: Reference `starting_detector_mid:figoverview' on page 21 undefin ed on input line 1184. [21] Underfull \hbox (badness 8075) in paragraph at lines 1194--1195 []\T1/ptm/m/n/10 In the left win-dow, which dis-plays the file struc-ture, nav- i-gate to: IN-STRU-MENT -> LaTeX Warning: Hyper reference `starting_detector_mid:figh5view' on page 22 und efined on input line 1197. LaTeX Warning: Reference `starting_detector_mid:figh5view' on page 22 undefined on input line 1197. [22 <./Screenshot_h5view.png>] Chapter 4. LaTeX Warning: Hyper reference `starting_detector_mid:figmpodfeedback' on page 23 undefined on input line 1248. LaTeX Warning: Reference `starting_detector_mid:figmpodfeedback' on page 23 und efined on input line 1248. [23] [24] Chapter 5. Overfull \hbox (47.79906pt too wide) in paragraph at lines 1364--1365 []\T1/ptm/m/n/10 for the DAQ: [][]https://in.xfel.eu/readthedocs/docs/detector- support/en/latest/diagnosis/generic/gen_daq_troubleshooting.html[][] Overfull \hbox (94.37802pt too wide) in paragraph at lines 1367--1368 []\T1/ptm/m/n/10 for the on-line pre-view: [][]https://in.xfel.eu/readthedocs/d ocs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.htm l[][] LaTeX Warning: Hyper reference `troubleshooting:interlock-issues' on page 25 un defined on input line 1399. [25] LaTeX Warning: Hyper reference `troubleshooting:tags' on page 26 undefined on i nput line 1433. LaTeX Warning: Reference `troubleshooting:tags' on page 26 undefined on input l ine 1433. [26 <./Screenshot_tags_.p ng>] LaTeX Warning: Hyper reference `troubleshooting:power-issues' on page 27 undefi ned on input line 1510. LaTeX Warning: Hyper reference `starting_detector_mid:manual-power' on page 27 undefined on input line 1538. LaTeX Warning: Hyper reference `starting_detector_mid:automatic-power' on page 27 undefined on input line 1550. LaTeX Warning: Hyper reference `troubleshooting:rundeck' on page 27 undefined o n input line 1563. [27] LaTeX Warning: Hyper reference `troubleshooting:mfpga-noupdate' on page 28 unde fined on input line 1590. LaTeX Warning: Hyper reference `troubleshooting:stopped-66' on page 28 undefine d on input line 1593. LaTeX Warning: Hyper reference `troubleshooting:keeps-running' on page 28 undef ined on input line 1599. [28] LaTeX Warning: Hyper reference `introduction:figmodulsandnodes' on page 29 unde fined on input line 1707. LaTeX Warning: Reference `introduction:figmodulsandnodes' on page 29 undefined on input line 1707. LaTeX Warning: Hyper reference `troubleshooting:h1h2-notsending' on page 29 und efined on input line 1727. [29] [30] Underfull \hbox (badness 10000) in paragraph at lines 1849--1852 LaTeX Warning: Hyper reference `troubleshooting:interlock-issues' on page 31 un defined on input line 1873. LaTeX Warning: Hyper reference `troubleshooting:cooling-issues' on page 31 unde fined on input line 1886. Underfull \hbox (badness 10000) in paragraph at lines 1890--1893 [31] [32] Chapter 6. Underfull \hbox (badness 10000) in paragraph at lines 1938--1941 [33] [34] Overfull \hbox (2.5089pt too wide) in paragraph at lines 2154--2155 [][][]\T1/ptm/m/n/10 https://in.xfel.eu/readthedocs/docs/detector-support/en/la test/diagnosis/generic/cal_online_troubleshooting.html[][] No file MID-AGIPD_UserManual.ind. [35] (./MID-AGIPD_UserManual.aux) Package rerunfilecheck Warning: File `MID-AGIPD_UserManual.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc} Output written on MID-AGIPD_UserManual.pdf (39 pages, 4235541 bytes). Transcript written on MID-AGIPD_UserManual.log. [rtd-command-info] start-time: 2020-10-22T17:06:57.246000Z, end-time: 2020-10-22T17:06:57.342000Z, duration: 0, exit-code: 0 makeindex -s python.ist MID-AGIPD_UserManual.idx This is makeindex, version 2.15 [TeX Live 2015/dev] (kpathsea + Thai support). Scanning style file ./python.ist......done (6 attributes redefined, 0 ignored). Scanning input file MID-AGIPD_UserManual.idx...done (0 entries accepted, 0 rejected). Nothing written in MID-AGIPD_UserManual.ind. Transcript written in MID-AGIPD_UserManual.ilg. [rtd-command-info] start-time: 2020-10-22T17:06:57.397000Z, end-time: 2020-10-22T17:07:00.079000Z, duration: 2, exit-code: 0 pdflatex -interaction=nonstopmode /user_builds/agipd-manual-mid/checkouts/latest/source/_build/latex/MID-AGIPD_UserManual.tex This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (/user_builds/agipd-manual-mid/checkouts/latest/source/_build/latex/MID-AGIPD_U serManual.tex LaTeX2e <2014/05/01> Babel <3.9l> and hyphenation patterns for 2 languages loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2009/06/02 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (./fncychap.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty Style option: `fancybox' v1.4 <2010/05/15> (tvz) ) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (./tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg) (/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty))) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz) (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty )) (/usr/share/texlive/texmf-dist/tex/latex/threeparttable/threeparttable.sty) (/usr/share/texlive/texmf-dist/tex/latex/mdwtools/footnote.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/graphics.cfg))) (/usr/share/texlive/texmf-dist/tex/generic/pdftex/pdfcolor.tex) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) Package hyperref Message: Driver (autodetected): hpdftex. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (/usr/share/texlive/texmf-dist/tex/latex/caption/newfloat.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty)) (/usr/share/texlive/texmf-dist/tex/latex/multirow/multirow.sty) (/usr/share/texlive/texmf-dist/tex/latex/eqparbox/eqparbox.sty (/usr/share/texlive/texmf-dist/tex/latex/environ/environ.sty (/usr/share/texlive/texmf-dist/tex/latex/trimspaces/trimspaces.sty))) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty) Writing index file MID-AGIPD_UserManual.idx (./MID-AGIPD_UserManual.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./MID-AGIPD_UserManual.out) (./MID-AGIPD_UserManual.out) Underfull \hbox (badness 10000) in paragraph at lines 133--133 (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./MID-AGIPD_UserManual.toc) Adding blank page after the table of contents. [1] [2] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) Underfull \hbox (badness 10000) in paragraph at lines 181--182 []\T1/ptm/m/n/10 Mpod power sup-plies for low and high volt-age of the de-tec-t or: Underfull \hbox (badness 10000) in paragraph at lines 181--182 [][]\T1/ptm/m/n/10 https://docs.xfel.eu/share/page/site/agipd/document-details? nodeRef=workspace://SpacesStore/3dfffbe2- Underfull \hbox (badness 10000) in paragraph at lines 187--188 []\T1/ptm/m/n/10 Julabo Chiller (in-vacuum cool-ing): [][]https://docs.xfel.eu/ share/page/site/agipd/document- [3 <./AGIPDinSAXposition.jpg>] Overfull \hbox (186.61783pt too wide) in paragraph at lines 196--197 []\T1/ptm/m/n/10 Clock & Con-trol: [][]https://docs.xfel.eu/alfresco/webdav/Sit es/advancedElectronics/documentLibrary/FPGA/Clock%20and%20Control/clockControlP roject.pdf[][] Overfull \hbox (13.89911pt too wide) in paragraph at lines 214--216 \T1/ptm/m/n/10 There is an elec-tronic log-book for the MID-AGIPD de-tec-tor: [ ][]https://in.xfel.eu/elog/1+MPix+AGIPD+Detector+for+MID/[][] [4] [5 <./agipd_naming.png>] [6 <./agipd_modules.png>] Chapter 2. [7 <./configtablemid.png>] [8] Chapter 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) LaTeX Warning: File `{./images/screenshots/AGIPD_overviewMID2020}.png' not foun d on input line 463. ! Package pdftex.def Error: File `./images/screenshots/AGIPD_overviewMID2020.pn g' not found. See the pdftex.def package documentation for explanation. Type H for immediate help. ... l.463 ...s/screenshots/AGIPD_overviewMID2020}.png} Overfull \hbox (46.97836pt too wide) in paragraph at lines 463--464 [][] [9] [10] [11 <./agipd_combined_control2020.png>] [12 <./huber_wing_chiller.jpg>] [13 <./Huber_display.jp g>] [14] [15] [16 <./agipd-power_23.02.png>] [17] [18] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [19] [20] [21] Underfull \hbox (badness 8075) in paragraph at lines 1194--1195 []\T1/ptm/m/n/10 In the left win-dow, which dis-plays the file struc-ture, nav- i-gate to: IN-STRU-MENT -> [22 <./Screenshot_h5view.png>] Chapter 4. [23] [24] Chapter 5. Overfull \hbox (47.79906pt too wide) in paragraph at lines 1364--1365 []\T1/ptm/m/n/10 for the DAQ: [][]https://in.xfel.eu/readthedocs/docs/detector- support/en/latest/diagnosis/generic/gen_daq_troubleshooting.html[][] Overfull \hbox (94.37802pt too wide) in paragraph at lines 1367--1368 []\T1/ptm/m/n/10 for the on-line pre-view: [][]https://in.xfel.eu/readthedocs/d ocs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.htm l[][] [25] [26 <./Screenshot_tags_.p ng>] [27] [28] [29] [30] Underfull \hbox (badness 10000) in paragraph at lines 1849--1852 Underfull \hbox (badness 10000) in paragraph at lines 1890--1893 [31] [32] Chapter 6. Underfull \hbox (badness 10000) in paragraph at lines 1938--1941 [33] [34] Overfull \hbox (2.5089pt too wide) in paragraph at lines 2154--2155 [][][]\T1/ptm/m/n/10 https://in.xfel.eu/readthedocs/docs/detector-support/en/la test/diagnosis/generic/cal_online_troubleshooting.html[][] (./MID-AGIPD_UserManual.ind) [35] (./MID-AGIPD_UserManual.aux) ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc} Output written on MID-AGIPD_UserManual.pdf (39 pages, 4242477 bytes). Transcript written on MID-AGIPD_UserManual.log. [rtd-command-info] start-time: 2020-10-22T17:07:00.154000Z, end-time: 2020-10-22T17:07:00.250000Z, duration: 0, exit-code: 0 mv -f /user_builds/agipd-manual-mid/checkouts/latest/source/_build/latex/MID-AGIPD_UserManual.pdf /user_builds/agipd-manual-mid/artifacts/latest/sphinx_pdf/agipd-manual-mid.pdf [rtd-command-info] start-time: 2020-10-22T17:07:00.748000Z, end-time: 2020-10-22T17:07:08.718000Z, duration: 7, exit-code: 0 python /user_builds/agipd-manual-mid/envs/latest/bin/sphinx-build -T -b epub -d _build/doctrees-epub -D language=en . _build/epub Running Sphinx v1.3.5 making output directory... loading translations [en]... done loading pickled environment... not yet created loading intersphinx inventory from http://docs.python.org/objects.inv... building [mo]: targets for 0 po files that are out of date building [epub]: targets for 6 source files that are out of date updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] OCD_guidelines reading sources... [ 33%] index reading sources... [ 50%] introduction reading sources... [ 66%] starting_detector_mid reading sources... [ 83%] stopping_detector reading sources... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:13: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:16: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:17: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:19: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:29: ERROR: Unexpected indentation. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:30: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:33: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:34: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:36: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:37: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:39: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:41: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:42: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:43: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:44: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:47: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:48: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:49: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:50: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:51: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:52: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:53: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:54: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:55: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:59: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:60: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:62: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:63: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:65: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/OCD_guidelines.rst:74: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/index.rst:11: WARNING: toctree contains reference to nonexisting document 'appendix' /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:52: ERROR: Figure caption must be a paragraph or empty comment. .. figure:: ./images/screenshots/AGIPD_overviewMID2020.png :width: 110 % The main overview scene for AGIPD /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:106: WARNING: Bullet list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:179: ERROR: Unknown directive type "coment". .. coment:: Currently the cooling cycle of the Julabo chiller is still leaky. Therefore in the beginning of a shift it should be checked in the rack room, whether the chiller displayes warning 40 (liquid level too low) and has to be refilled. This warning will not appear in Karabo, one has to go to the chiller to check! To refill the chiller the detector has to be warmed up. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:363: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:365: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:377: WARNING: Inline interpreted text or phrase reference start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:509: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:542: WARNING: Literal block expected; none found. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:608: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/starting_detector_mid.rst:None: WARNING: image file not readable: ./images/screenshots/AGIPD_overviewMID2020.png /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/stopping_detector.rst:73: WARNING: Title underline too short. Switching off Huber Unichiller -------------------------- /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:57: WARNING: Inline emphasis start-string without end-string. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:78: ERROR: Unknown directive type "comment". .. comment:: (see picture below) .. _u901: .. figure:: ./images/screenshots/mpod_u901_trip_.png /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:146: ERROR: Unknown directive type "coment". .. coment:: Automatic power procedure failed during powering of the asics -------------------------------------------------------------- If the automatic procedure fails and goes to the state 'unknown' when trying to switch on the asics: * check the error displayed by the procedure: * if the observed error is: Failed on task run_det because: Calling slot "start" not allowed in state "State.OFF" 1. Reinstante SPB_IRU_AGIPD1M1/MDL/FPGA_COMP. 2. Disconnect, reconnect and reset, 3. Configure the detector again 4. Power the Asics manually and push data /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:255: WARNING: Title underline too short. Verify with Rundeck, that the detector is not sending data __________________________________________ /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:260: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:261: WARNING: Block quote ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:262: WARNING: Enumerated list ends without a blank line; unexpected unindent. /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:264: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 16%] OCD_guidelines writing output... [ 33%] index writing output... [ 50%] introduction writing output... [ 66%] starting_detector_mid writing output... [ 83%] stopping_detector writing output... [100%] troubleshooting /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:326: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) /user_builds/agipd-manual-mid/checkouts/latest/source/troubleshooting.rst:338: WARNING: undefined label: https://in.xfel.eu/readthedocs/docs/detector-support/en/latest/diagnosis/generic/cal_online_troubleshooting.html (if the link has no caption the label must precede a section header) generating indices... genindex writing additional pages... search copying images... [ 10%] ./images/screenshots/agipd-power_23.02.png copying images... [ 20%] ./images/AGIPDinSAXposition.jpg copying images... [ 30%] ./images/agipd_naming.png copying images... [ 40%] ./images/Huber_display.jpg copying images... [ 50%] ./images/agipd_modules.png copying images... [ 60%] ./images/huber_wing_chiller.jpg copying images... [ 70%] ./images/screenshots/Screenshot_h5view.png copying images... [ 80%] ./images/screenshots/agipd_combined_control2020.png copying images... [ 90%] ./images/configtablemid.png copying images... [100%] ./images/screenshots/Screenshot_tags_.png copying static files... WARNING: html_static_path entry '/user_builds/agipd-manual-mid/checkouts/latest/source/_static' does not exist done copying extra files... done writing mimetype file... writing META-INF/container.xml file... writing content.opf file... writing toc.ncx file... writing AGIPDatMIDUserManual.epub file... build succeeded, 57 warnings. [rtd-command-info] start-time: 2020-10-22T17:07:08.794000Z, end-time: 2020-10-22T17:07:08.833000Z, duration: 0, exit-code: 0 mv -f /user_builds/agipd-manual-mid/checkouts/latest/source/_build/epub/AGIPDatMIDUserManual.epub /user_builds/agipd-manual-mid/artifacts/latest/sphinx_epub/agipd-manual-mid.epub