Read the Docs build information Build id: 27755 Project: jungfrau-detector-documentation Version: latest Commit: 851764463063b49088591b5fc2e58c605b46858e Date: 2024-03-07T15:59:37.200500Z State: finished Success: True [rtd-command-info] start-time: 2024-03-07T15:59:38.491889Z, end-time: 2024-03-07T15:59:39.536708Z, duration: 1, exit-code: 0 git clone --no-single-branch --depth 50 http://git.xfel.eu/detectors/jungfrau_docs.git . Cloning into '.'... [rtd-command-info] start-time: 2024-03-07T15:59:39.830232Z, end-time: 2024-03-07T15:59:40.012213Z, duration: 0, exit-code: 0 git checkout --force origin/master Note: checking out 'origin/master'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b HEAD is now at 8517644 Merge branch 'jf_darks_update' into 'master' [rtd-command-info] start-time: 2024-03-07T15:59:40.127957Z, end-time: 2024-03-07T15:59:40.189592Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2024-03-07T15:59:42.178539Z, end-time: 2024-03-07T15:59:47.366073Z, duration: 5, exit-code: 0 python3.8 -mvirtualenv /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest Using base prefix '/home/docs/.pyenv/versions/3.8.0' New python executable in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/python3.8 Also creating executable in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2024-03-07T15:59:47.461104Z, end-time: 2024-03-07T15:59:48.490665Z, duration: 1, exit-code: 0 /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/python -m pip install --upgrade --no-cache-dir pip Requirement already satisfied: pip in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (24.0) [rtd-command-info] start-time: 2024-03-07T15:59:48.576740Z, end-time: 2024-03-07T16:00:14.625642Z, duration: 26, exit-code: 0 /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/python -m pip install --upgrade --no-cache-dir jinja2==2.11.3 markupsafe==2.0.1 Pygments==2.3.1 setuptools==41.0.1 docutils==0.14 mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<1.1 Collecting jinja2==2.11.3 Downloading Jinja2-2.11.3-py2.py3-none-any.whl.metadata (3.5 kB) Collecting markupsafe==2.0.1 Downloading MarkupSafe-2.0.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl.metadata (3.2 kB) Collecting Pygments==2.3.1 Downloading Pygments-2.3.1-py2.py3-none-any.whl.metadata (1.5 kB) Collecting setuptools==41.0.1 Downloading setuptools-41.0.1-py2.py3-none-any.whl.metadata (3.3 kB) Collecting docutils==0.14 Downloading docutils-0.14-py3-none-any.whl.metadata (2.3 kB) Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 10.7 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting pillow==5.4.1 Downloading Pillow-5.4.1.tar.gz (16.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 16.0/16.0 MB 140.1 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.13-py3-none-any.whl.metadata (3.0 kB) Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl.metadata (5.6 kB) Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl.metadata (463 bytes) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl.metadata (7.3 kB) Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl.metadata (3.0 kB) Collecting readthedocs-sphinx-ext<1.1 Downloading readthedocs_sphinx_ext-1.0.4-py2.py3-none-any.whl.metadata (1.4 kB) Collecting future (from commonmark==0.8.1) Downloading future-1.0.0-py3-none-any.whl.metadata (4.0 kB) Collecting six>=1.5 (from sphinx<2) Downloading six-1.16.0-py2.py3-none-any.whl.metadata (1.8 kB) Collecting snowballstemmer>=1.1 (from sphinx<2) Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl.metadata (6.5 kB) Collecting babel!=2.0,>=1.3 (from sphinx<2) Downloading Babel-2.14.0-py3-none-any.whl.metadata (1.6 kB) Collecting imagesize (from sphinx<2) Downloading imagesize-1.4.1-py2.py3-none-any.whl.metadata (1.5 kB) Collecting requests>=2.0.0 (from sphinx<2) Downloading requests-2.31.0-py3-none-any.whl.metadata (4.6 kB) Collecting packaging (from sphinx<2) Downloading packaging-23.2-py3-none-any.whl.metadata (3.2 kB) Collecting sphinxcontrib-websupport (from sphinx<2) Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl.metadata (1.5 kB) Collecting pytz>=2015.7 (from babel!=2.0,>=1.3->sphinx<2) Downloading pytz-2024.1-py2.py3-none-any.whl.metadata (22 kB) Collecting charset-normalizer<4,>=2 (from requests>=2.0.0->sphinx<2) Downloading charset_normalizer-3.3.2-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (33 kB) Collecting idna<4,>=2.5 (from requests>=2.0.0->sphinx<2) Downloading idna-3.6-py3-none-any.whl.metadata (9.9 kB) Collecting urllib3<3,>=1.21.1 (from requests>=2.0.0->sphinx<2) Downloading urllib3-2.2.1-py3-none-any.whl.metadata (6.4 kB) Collecting certifi>=2017.4.17 (from requests>=2.0.0->sphinx<2) Downloading certifi-2024.2.2-py3-none-any.whl.metadata (2.2 kB) Collecting sphinxcontrib-serializinghtml (from sphinxcontrib-websupport->sphinx<2) Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl.metadata (1.5 kB) Downloading Jinja2-2.11.3-py2.py3-none-any.whl (125 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 125.7/125.7 kB 180.0 MB/s eta 0:00:00 Downloading MarkupSafe-2.0.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (30 kB) Downloading Pygments-2.3.1-py2.py3-none-any.whl (849 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 849.5/849.5 kB 195.1 MB/s eta 0:00:00 Downloading setuptools-41.0.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 576.0/576.0 kB 194.3 MB/s eta 0:00:00 Downloading docutils-0.14-py3-none-any.whl (543 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 543.2/543.2 kB 201.7 MB/s eta 0:00:00 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.4/47.4 kB 138.6 MB/s eta 0:00:00 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Downloading alabaster-0.7.13-py3-none-any.whl (13 kB) Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 160.6 MB/s eta 0:00:00 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 140.5 MB/s eta 0:00:00 Downloading readthedocs_sphinx_ext-1.0.4-py2.py3-none-any.whl (28 kB) Downloading Babel-2.14.0-py3-none-any.whl (11.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 11.0/11.0 MB 97.0 MB/s eta 0:00:00 Downloading requests-2.31.0-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.6/62.6 kB 178.2 MB/s eta 0:00:00 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 168.2 MB/s eta 0:00:00 Downloading future-1.0.0-py3-none-any.whl (491 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 491.3/491.3 kB 191.8 MB/s eta 0:00:00 Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Downloading packaging-23.2-py3-none-any.whl (53 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 53.0/53.0 kB 128.1 MB/s eta 0:00:00 Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Downloading certifi-2024.2.2-py3-none-any.whl (163 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 163.8/163.8 kB 194.5 MB/s eta 0:00:00 Downloading charset_normalizer-3.3.2-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (141 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 141.1/141.1 kB 197.8 MB/s eta 0:00:00 Downloading idna-3.6-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.6/61.6 kB 165.7 MB/s eta 0:00:00 Downloading pytz-2024.1-py2.py3-none-any.whl (505 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 505.5/505.5 kB 210.5 MB/s eta 0:00:00 Downloading urllib3-2.2.1-py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.1/121.1 kB 200.7 MB/s eta 0:00:00 Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 168.0 MB/s eta 0:00:00 Building wheels for collected packages: mock, pillow Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23753 sha256=c55d0987eece49e29c5a69ccb1c1a5b3dda9acea8406d8d0b171464ba9a20c40 Stored in directory: /tmp/pip-ephem-wheel-cache-44sb39v2/wheels/41/7c/21/90057f91c6ead7c77a90c52d6e85ca48bf82d8b0d3f8dfbb65 Building wheel for pillow (setup.py): started Building wheel for pillow (setup.py): finished with status 'done' Created wheel for pillow: filename=Pillow-5.4.1-cp38-cp38-linux_x86_64.whl size=1262633 sha256=337c84bf2b23ef3714fe6572f03390d4b5eb56a4022e5e13cb3bfe6fc9df8f86 Stored in directory: /tmp/pip-ephem-wheel-cache-44sb39v2/wheels/5f/a8/6b/5b7b3f764d879214eb03570f74d2b086201eb514e6ffa68d6d Successfully built mock pillow Installing collected packages: snowballstemmer, pytz, Pygments, mock, docutils, urllib3, sphinxcontrib-serializinghtml, six, setuptools, pillow, packaging, markupsafe, imagesize, idna, future, charset-normalizer, certifi, babel, alabaster, sphinxcontrib-websupport, requests, jinja2, commonmark, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Attempting uninstall: setuptools Found existing installation: setuptools 69.1.1 Uninstalling setuptools-69.1.1: Successfully uninstalled setuptools-69.1.1 Successfully installed Pygments-2.3.1 alabaster-0.7.13 babel-2.14.0 certifi-2024.2.2 charset-normalizer-3.3.2 commonmark-0.8.1 docutils-0.14 future-1.0.0 idna-3.6 imagesize-1.4.1 jinja2-2.11.3 markupsafe-2.0.1 mock-1.0.1 packaging-23.2 pillow-5.4.1 pytz-2024.1 readthedocs-sphinx-ext-1.0.4 recommonmark-0.5.0 requests-2.31.0 setuptools-41.0.1 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-2.2.1 [rtd-command-info] start-time: 2024-03-07T16:00:14.714146Z, end-time: 2024-03-07T16:00:17.995242Z, duration: 3, exit-code: 0 /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Collecting git+https://git.xfel.eu/xfel-rtd/rtd-conf.git (from -r requirements.txt (line 1)) Cloning https://git.xfel.eu/xfel-rtd/rtd-conf.git to /tmp/pip-req-build-3xevx8u4 Running command git clone --filter=blob:none --quiet https://git.xfel.eu/xfel-rtd/rtd-conf.git /tmp/pip-req-build-3xevx8u4 Resolved https://git.xfel.eu/xfel-rtd/rtd-conf.git to commit 3d66246db37045eaa716d206b13441613c1b413e Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Requirement already satisfied: sphinx==1.8.6 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from -r requirements.txt (line 2)) (1.8.6) Collecting breathe==4.7.3 (from -r requirements.txt (line 3)) Downloading breathe-4.7.3-py2.py3-none-any.whl.metadata (1.0 kB) Collecting slumber==0.7.1 (from -r requirements.txt (line 4)) Downloading slumber-0.7.1.tar.gz (10 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting urllib3==1.26.6 (from -r requirements.txt (line 5)) Downloading urllib3-1.26.6-py2.py3-none-any.whl.metadata (44 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 44.3/44.3 kB 2.3 MB/s eta 0:00:00 Requirement already satisfied: six>=1.5 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (1.16.0) Requirement already satisfied: Jinja2>=2.3 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (2.11.3) Requirement already satisfied: Pygments>=2.0 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (2.3.1) Requirement already satisfied: docutils<0.18,>=0.11 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (0.14) Requirement already satisfied: snowballstemmer>=1.1 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (2.2.0) Requirement already satisfied: babel!=2.0,>=1.3 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (2.14.0) Requirement already satisfied: alabaster<0.8,>=0.7 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (0.7.13) Requirement already satisfied: imagesize in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (1.4.1) Requirement already satisfied: requests>=2.0.0 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (2.31.0) Requirement already satisfied: setuptools in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (41.0.1) Requirement already satisfied: packaging in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (23.2) Requirement already satisfied: sphinxcontrib-websupport in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinx==1.8.6->-r requirements.txt (line 2)) (1.2.4) Requirement already satisfied: pytz>=2015.7 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from babel!=2.0,>=1.3->sphinx==1.8.6->-r requirements.txt (line 2)) (2024.1) Requirement already satisfied: MarkupSafe>=0.23 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from Jinja2>=2.3->sphinx==1.8.6->-r requirements.txt (line 2)) (2.0.1) Requirement already satisfied: charset-normalizer<4,>=2 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from requests>=2.0.0->sphinx==1.8.6->-r requirements.txt (line 2)) (3.3.2) Requirement already satisfied: idna<4,>=2.5 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from requests>=2.0.0->sphinx==1.8.6->-r requirements.txt (line 2)) (3.6) Requirement already satisfied: certifi>=2017.4.17 in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from requests>=2.0.0->sphinx==1.8.6->-r requirements.txt (line 2)) (2024.2.2) Requirement already satisfied: sphinxcontrib-serializinghtml in /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/lib/python3.8/site-packages (from sphinxcontrib-websupport->sphinx==1.8.6->-r requirements.txt (line 2)) (1.1.5) Downloading breathe-4.7.3-py2.py3-none-any.whl (73 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 73.7/73.7 kB 12.8 MB/s eta 0:00:00 Downloading urllib3-1.26.6-py2.py3-none-any.whl (138 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 138.5/138.5 kB 19.5 MB/s eta 0:00:00 Building wheels for collected packages: slumber, RTDConf Building wheel for slumber (setup.py): started Building wheel for slumber (setup.py): finished with status 'done' Created wheel for slumber: filename=slumber-0.7.1-py3-none-any.whl size=8098 sha256=ac88149695520717273d9b10fb7fca5dfcc9a1fdafc29d47ee6544e8c1958752 Stored in directory: /tmp/pip-ephem-wheel-cache-5pmxumtq/wheels/d9/31/b7/b6202c6ff32847610ed92e1d3cc9d7cf732bcb2d9b5abad083 Building wheel for RTDConf (setup.py): started Building wheel for RTDConf (setup.py): finished with status 'done' Created wheel for RTDConf: filename=RTDConf-0.1-py3-none-any.whl size=2649 sha256=eb656ab4b4c47fa6ac06252393f558338a89a42a25c7190e2e88add7364bf8e3 Stored in directory: /tmp/pip-ephem-wheel-cache-5pmxumtq/wheels/35/65/f6/649e0b84ee3e4f6c34209282bbd42c699d74473e1bdacd5762 Successfully built slumber RTDConf Installing collected packages: RTDConf, urllib3, slumber, breathe Attempting uninstall: urllib3 Found existing installation: urllib3 2.2.1 Uninstalling urllib3-2.2.1: Successfully uninstalled urllib3-2.2.1 Successfully installed RTDConf-0.1 breathe-4.7.3 slumber-0.7.1 urllib3-1.26.6 [rtd-command-info] start-time: 2024-03-07T16:00:18.767201Z, end-time: 2024-03-07T16:00:18.838350Z, duration: 0, exit-code: 0 cat source/conf.py #!/usr/bin/env python3 # -*- coding: utf-8 -*- # # Jungfrau documentation documentation build configuration file, created by # sphinx-quickstart on Tue Oct 30 15:30:29 2018. # # This file is execfile()d with the current directory set to its # containing dir. # # Note that not all possible configuration values are present in this # autogenerated file. # # All configuration values have a default; values that are commented out # serve to show the default. # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # import os import sys # sys.path.insert(0, os.path.abspath('.')) # -- General configuration ------------------------------------------------ # If your documentation needs a minimal Sphinx version, state it here. # # needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ 'sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo', 'sphinx.ext.mathjax', 'sphinx.ext.ifconfig', # 'sphinx.ext.viewcode' # 'sphinx.ext.graphviz', ] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # The suffix(es) of source filenames. # You can specify multiple suffix as a list of string: # # source_suffix = ['.rst', '.md'] source_suffix = '.rst' # The encoding of source files. # # source_encoding = 'utf-8-sig' # The master toctree document. master_doc = 'index' # General information about the project. project = 'Jungfrau documentation' copyright = '2018, M. Ramilli' author = 'M. Ramilli' # The version info for the project you're documenting, acts as replacement for # |version| and |release|, also used in various other places throughout the # built documents. # # The short X.Y version. version = '0.1' # The full version, including alpha/beta/rc tags. release = '0.1' # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. # # This is also used if you do content translation via gettext catalogs. # Usually you set "language" from the command line for these cases. language = None # There are two options for replacing |today|: either, you set today to some # non-false value, then it is used: # # today = '' # # Else, today_fmt is used as the format for a strftime call. # # today_fmt = '%B %d, %Y' # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This patterns also effect to html_static_path and html_extra_path exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store'] # The reST default role (used for this markup: `text`) to use for all # documents. # # default_role = None # If true, '()' will be appended to :func: etc. cross-reference text. # # add_function_parentheses = True # If true, the current module name will be prepended to all description # unit titles (such as .. function::). # # add_module_names = True # If true, sectionauthor and moduleauthor directives will be shown in the # output. They are ignored by default. # # show_authors = False # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'sphinx' # A list of ignored prefixes for module index sorting. # modindex_common_prefix = [] # If true, keep warnings as "system message" paragraphs in the built documents. # keep_warnings = False # If true, `todo` and `todoList` produce output, else they produce nothing. todo_include_todos = True numfig = True # -- Options for HTML output ---------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = 'sphinx_rtd_theme' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. # # html_theme_options = {} # Add any paths that contain custom themes here, relative to this directory. # html_theme_path = [] # The name for this set of Sphinx documents. # " v documentation" by default. # # html_title = 'Jungfrau documentation v0.1' # A shorter title for the navigation bar. Default is the same as html_title. # # html_short_title = None # The name of an image file (relative to this directory) to place at the top # of the sidebar. # # html_logo = None # The name of an image file (relative to this directory) to use as a favicon of # the docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. # # html_favicon = None # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] # Add any extra paths that contain custom files (such as robots.txt or # .htaccess) here, relative to this directory. These files are copied # directly to the root of the documentation. # # html_extra_path = [] # If not None, a 'Last updated on:' timestamp is inserted at every page # bottom, using the given strftime format. # The empty string is equivalent to '%b %d, %Y'. # # html_last_updated_fmt = None # If true, SmartyPants will be used to convert quotes and dashes to # typographically correct entities. # # html_use_smartypants = True # Custom sidebar templates, maps document names to template names. # # html_sidebars = {} # Additional templates that should be rendered to pages, maps page names to # template names. # # html_additional_pages = {} # If false, no module index is generated. # # html_domain_indices = True # If false, no index is generated. # # html_use_index = True # If true, the index is split into individual pages for each letter. # # html_split_index = False # If true, links to the reST sources are added to the pages. # # html_show_sourcelink = True # If true, "Created using Sphinx" is shown in the HTML footer. Default is True. # # html_show_sphinx = True # If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. # # html_show_copyright = True # If true, an OpenSearch description file will be output, and all pages will # contain a tag referring to it. The value of this option must be the # base URL from which the finished HTML is served. # # html_use_opensearch = '' # This is the file name suffix for HTML files (e.g. ".xhtml"). # html_file_suffix = None # Language to be used for generating the HTML full-text search index. # Sphinx supports the following languages: # 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja' # 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr', 'zh' # # html_search_language = 'en' # A dictionary with options for the search language support, empty by default. # 'ja' uses this config value. # 'zh' user can custom change `jieba` dictionary path. # # html_search_options = {'type': 'default'} # The name of a javascript file (relative to the configuration directory) that # implements a search results scorer. If empty, the default will be used. # # html_search_scorer = 'scorer.js' # Output file base name for HTML help builder. htmlhelp_basename = 'Jungfraudocumentationdoc' # -- Options for LaTeX output --------------------------------------------- latex_elements = { # The paper size ('letterpaper' or 'a4paper'). # # 'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). # # 'pointsize': '10pt', # Additional stuff for the LaTeX preamble. # # 'preamble': '', # Latex figure (float) alignment # # 'figure_align': 'htbp', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, # author, documentclass [howto, manual, or own class]). latex_documents = [ (master_doc, 'Jungfraudocumentation.tex', 'Jungfrau documentation Documentation', 'M. Ramilli', 'manual'), ] # The name of an image file (relative to this directory) to place at the top of # the title page. # # latex_logo = None # For "manual" documents, if this is true, then toplevel headings are parts, # not chapters. # # latex_use_parts = False # If true, show page references after internal links. # # latex_show_pagerefs = False # If true, show URL addresses after external links. # # latex_show_urls = False # Documents to append as an appendix to all manuals. # # latex_appendices = [] # It false, will not define \strong, \code, itleref, \crossref ... but only # \sphinxstrong, ..., \sphinxtitleref, ... To help avoid clash with user added # packages. # # latex_keep_old_macro_names = True # If false, no module index is generated. # # latex_domain_indices = True # -- Options for manual page output --------------------------------------- # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ (master_doc, 'jungfraudocumentation', 'Jungfrau documentation Documentation', [author], 1) ] # If true, show URL addresses after external links. # # man_show_urls = False # -- Options for Texinfo output ------------------------------------------- # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ (master_doc, 'Jungfraudocumentation', 'Jungfrau documentation Documentation', author, 'Jungfraudocumentation', 'One line description of project.', 'Miscellaneous'), ] # Documents to append as an appendix to all manuals. # # texinfo_appendices = [] # If false, no module index is generated. # # texinfo_domain_indices = True # How to display URL addresses: 'footnote', 'no', or 'inline'. # # texinfo_show_urls = 'footnote' # If true, do not generate a @detailmenu in the "Top" node's menu. # # texinfo_no_detailmenu = False # Example configuration for intersphinx: refer to the Python standard library. # import slumber # import json # the RTDHOST should be set to localhost if you only compile on RTD # otherwise it needs to be set to the server hosting the internal RTD # RTDHOST = 'https://in.xfel.eu/readthedocs' # api = slumber.API(base_url='{}/api/v1/'.format(RTDHOST)) # projects = api.project.get()['objects'] # isphinx = {'python': ('http://python.readthedocs.io/en/latest/', None), # 'numpy': ('http://numpy.readthedocs.io/en/latest/', None), # 'scipy': ('http://scipy.readthedocs.io/en/latest/', None)} # for proj in projects: # isphinx[proj['slug'].replace('-', '')] = \ # ('{}/docs/{}/en/latest'.format(RTDHOST, proj['slug']), None) # intersphinx_mapping = isphinx intersphinx_mapping = {'https://docs.python.org/': None} # def setup(app): # app.add_config_value('includeDevInfo', 'false', 'env') ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/master/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # import importlib import sys import os.path from six import string_types from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'http://rtd.xfel.eu/websupport' websupport2_static_url = '/static/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "media/", 'STATIC_URL': "/static/", 'PRODUCTION_DOMAIN': "rtd.xfel.eu", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("pdf", "//rtd.xfel.eu/downloads/jungfrau-detector-documentation/latest/pdf/"), ("html", "//rtd.xfel.eu/downloads/jungfrau-detector-documentation/latest/htmlzip/"), ("epub", "//rtd.xfel.eu/downloads/jungfrau-detector-documentation/latest/epub/"), ], 'subprojects': [ ], 'slug': 'jungfrau-detector-documentation', 'name': u'Jungfrau Detector Documentation', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'http://rtd.xfel.eu/docs/jungfrau-detector-documentation/en/latest/', 'analytics_code': '', 'single_version': False, 'conf_py_path': '/source/', 'api_host': 'http://rtd.xfel.eu', 'github_user': 'None', 'proxied_api_host': '/_', 'github_repo': 'None', 'github_version': 'master', 'display_github': False, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'master', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'master', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'None', 'commit': '85176446', } if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2024-03-07T16:00:18.931455Z, end-time: 2024-03-07T16:00:20.831832Z, duration: 1, exit-code: 0 python /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/sphinx-build -T -E -b readthedocs -d _build/doctrees-readthedocs -D language=en . _build/html Running Sphinx v1.8.6 loading translations [en]... done making output directory... loading intersphinx inventory from https://docs.python.org/objects.inv... intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv building [mo]: targets for 0 po files that are out of date building [readthedocs]: targets for 6 source files that are out of date updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] general_introduction reading sources... [ 33%] index reading sources... [ 50%] jf_correction reading sources... [ 66%] operation reading sources... [ 83%] setup reading sources... [100%] troubleshooting looking for now-outdated files... /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/jf_correction.rst:60: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:89: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:90: WARNING: Block quote ends without a blank line; unexpected unindent. none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 16%] general_introduction writing output... [ 33%] index writing output... [ 50%] jf_correction writing output... [ 66%] operation writing output... [ 83%] setup writing output... [100%] troubleshooting generating indices... genindex writing additional pages... search copying images... [ 4%] pics/JF_Eval_Front_2.jpg copying images... [ 8%] pics/JF_Eval_Board.jpg copying images... [ 12%] pics/JF_Trigger_Board.jpg copying images... [ 16%] pics/JF_Module_Connectors.jpg copying images... [ 20%] pics/Data_Struct_JF.png copying images... [ 24%] pics/m039_CS_DGS.png copying images... [ 28%] pics/m039_Ped_G0.png copying images... [ 32%] pics/m039_Ped_G1.png copying images... [ 36%] pics/m039_Ped_G2.png copying images... [ 40%] pics/JF_Corr_Data.png copying images... [ 44%] pics/jungfrau_devices.png copying images... [ 48%] pics/JF1M_boards.jpg copying images... [ 52%] pics/sls_architecture.png copying images... [ 56%] pics/JF_Control_NetwConf.png copying images... [ 60%] pics/JF_Receiver_TCPport.png copying images... [ 64%] pics/JF_Cont_DetV_Circle.png copying images... [ 68%] pics/JF_Receiver_OnlineDisplEn.png copying images... [ 72%] pics/JF_PacketLoss.png copying images... [ 76%] pics/R0881_Img55_ADC.png copying images... [ 80%] pics/JUNGFRAU_Overheating.png copying images... [ 84%] pics/JF_Control_DeviceServers.png copying images... [ 88%] pics/JF_Control_detHostName.png copying images... [ 92%] pics/telnet_blackfin_smudged.png copying images... [ 96%] pics/reboot_blackfin_smudged.png copying images... [100%] pics/ping_bchip_output_cut.png copying static files... done WARNING: html_static_path entry '/usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/_static' does not exist copying readthedocs static files... done copying searchtools... done copying extra files... done dumping search index in English (code: en) ... done dumping object inventory... done build succeeded, 4 warnings. The HTML pages are in _build/html. [rtd-command-info] start-time: 2024-03-07T16:00:21.170324Z, end-time: 2024-03-07T16:00:22.888924Z, duration: 1, exit-code: 0 python /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/sphinx-build -T -b readthedocssinglehtmllocalmedia -d _build/doctrees-readthedocssinglehtmllocalmedia -D language=en . _build/localmedia Running Sphinx v1.8.6 loading translations [en]... done making output directory... loading intersphinx inventory from https://docs.python.org/objects.inv... intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] general_introduction reading sources... [ 33%] index reading sources... [ 50%] jf_correction reading sources... [ 66%] operation reading sources... [ 83%] setup reading sources... [100%] troubleshooting /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/jf_correction.rst:60: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:89: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:90: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done assembling single document... general_introduction setup operation jf_correction troubleshooting writing... done writing additional files... copying images... [ 4%] pics/JF_Eval_Front_2.jpg copying images... [ 8%] pics/JF_Eval_Board.jpg copying images... [ 12%] pics/JF_Trigger_Board.jpg copying images... [ 16%] pics/JF_Module_Connectors.jpg copying images... [ 20%] pics/Data_Struct_JF.png copying images... [ 24%] pics/m039_CS_DGS.png copying images... [ 28%] pics/sls_architecture.png copying images... [ 32%] pics/JF_Control_NetwConf.png copying images... [ 36%] pics/JF_Receiver_TCPport.png copying images... [ 40%] pics/JF_Cont_DetV_Circle.png copying images... [ 44%] pics/jungfrau_devices.png copying images... [ 48%] pics/JF1M_boards.jpg copying images... [ 52%] pics/m039_Ped_G0.png copying images... [ 56%] pics/m039_Ped_G1.png copying images... [ 60%] pics/m039_Ped_G2.png copying images... [ 64%] pics/JF_Corr_Data.png copying images... [ 68%] pics/JF_Receiver_OnlineDisplEn.png copying images... [ 72%] pics/JF_PacketLoss.png copying images... [ 76%] pics/R0881_Img55_ADC.png copying images... [ 80%] pics/JUNGFRAU_Overheating.png copying images... [ 84%] pics/JF_Control_DeviceServers.png copying images... [ 88%] pics/JF_Control_detHostName.png copying images... [ 92%] pics/telnet_blackfin_smudged.png copying images... [ 96%] pics/reboot_blackfin_smudged.png copying images... [100%] pics/ping_bchip_output_cut.png copying static files... WARNING: html_static_path entry '/usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/_static' does not exist done copying readthedocs static files... done copying extra files... done dumping object inventory... done build succeeded, 4 warnings. The HTML page is in _build/localmedia. [rtd-command-info] start-time: 2024-03-07T16:00:23.249057Z, end-time: 2024-03-07T16:00:24.843741Z, duration: 1, exit-code: 0 python /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/sphinx-build -b latex -D language=en -d _build/doctrees . _build/latex Running Sphinx v1.8.6 loading translations [en]... done making output directory... loading intersphinx inventory from https://docs.python.org/objects.inv... intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv building [mo]: targets for 0 po files that are out of date building [latex]: all documents updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] general_introduction reading sources... [ 33%] index reading sources... [ 50%] jf_correction reading sources... [ 66%] operation reading sources... [ 83%] setup reading sources... [100%] troubleshooting /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/jf_correction.rst:60: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:89: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:90: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done processing Jungfraudocumentation.tex...index general_introduction setup operation jf_correction troubleshooting resolving references... writing... done copying images... [ 4%] pics/JF_Eval_Front_2.jpg copying images... [ 8%] pics/JF_Eval_Board.jpg copying images... [ 12%] pics/JF_Trigger_Board.jpg copying images... [ 16%] pics/JF_Module_Connectors.jpg copying images... [ 20%] pics/Data_Struct_JF.png copying images... [ 24%] pics/m039_CS_DGS.png copying images... [ 28%] pics/sls_architecture.png copying images... [ 32%] pics/JF_Control_NetwConf.png copying images... [ 36%] pics/JF_Receiver_TCPport.png copying images... [ 40%] pics/JF_Cont_DetV_Circle.png copying images... [ 44%] pics/jungfrau_devices.png copying images... [ 48%] pics/JF1M_boards.jpg copying images... [ 52%] pics/m039_Ped_G0.png copying images... [ 56%] pics/m039_Ped_G1.png copying images... [ 60%] pics/m039_Ped_G2.png copying images... [ 64%] pics/JF_Corr_Data.png copying images... [ 68%] pics/JF_Receiver_OnlineDisplEn.png copying images... [ 72%] pics/JF_PacketLoss.png copying images... [ 76%] pics/R0881_Img55_ADC.png copying images... [ 80%] pics/JUNGFRAU_Overheating.png copying images... [ 84%] pics/JF_Control_DeviceServers.png copying images... [ 88%] pics/JF_Control_detHostName.png copying images... [ 92%] pics/telnet_blackfin_smudged.png copying images... [ 96%] pics/reboot_blackfin_smudged.png copying images... [100%] pics/ping_bchip_output_cut.png copying TeX support files... done build succeeded, 3 warnings. The LaTeX files are in _build/latex. Run 'make' in that directory to run these through (pdf)latex (use `make latexpdf' here to do that automatically). [rtd-command-info] start-time: 2024-03-07T16:00:27.672878Z, end-time: 2024-03-07T16:00:27.736149Z, duration: 0, exit-code: 0 cat latexmkrc $latex = 'latex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $pdflatex = 'pdflatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $lualatex = 'lualatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $xelatex = 'xelatex --no-pdf ' . $ENV{'LATEXOPTS'} . ' %O %S'; $makeindex = 'makeindex -s python.ist %O -o %D %S'; add_cus_dep( "glo", "gls", 0, "makeglo" ); sub makeglo { return system( "makeindex -s gglo.ist -o '$_[0].gls' '$_[0].glo'" ); } [rtd-command-info] start-time: 2024-03-07T16:00:27.829096Z, end-time: 2024-03-07T16:00:34.145783Z, duration: 6, exit-code: 0 latexmk -r latexmkrc -pdf -f -dvi- -ps- -jobname=jungfrau-detector-documentation -interaction=nonstopmode Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 4, chunk 1. Subroutine makeglo redefined at (eval 11) line 7, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 4, chunk 1. Latexmk: This is Latexmk, John Collins, 1 January 2015, version: 4.41. File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at /usr/bin/latexmk line 7482. Rule 'pdflatex': Rules & subrules not known to be previously run: pdflatex Rule 'pdflatex': The following rules & subrules became out-of-date: 'pdflatex' ------------ Run number 1 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="jungfrau-detector-documentation" "Jungfraudocumentation.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./Jungfraudocumentation.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2018/12/22 v1.8.3 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) Writing index file jungfrau-detector-documentation.idx (./jungfrau-detector-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] [1] [2] [1] [2] Chapter 1. LaTeX Warning: Hyper reference `general_introduction:label-jfb' on page 3 undef ined on input line 128. LaTeX Warning: Reference `general_introduction:label-jfb' on page 3 undefined o n input line 128. [3] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) LaTeX Warning: Hyper reference `general_introduction:label-jf-tr' on page 4 und efined on input line 163. LaTeX Warning: Reference `general_introduction:label-jf-tr' on page 4 undefined on input line 163. LaTeX Warning: Hyper reference `general_introduction:label-jf' on page 4 undefi ned on input line 164. LaTeX Warning: Reference `general_introduction:label-jf' on page 4 undefined on input line 164. [4 <./JF_Eval_Front_2.jpg>] [5 <./JF_Eval_Board.jpg>] [6 <./JF_Trigger_Board.jp g>] [7 <./JF_Module_Connectors.jpg>] LaTeX Warning: Hyper reference `general_introduction:label-jfh5' on page 8 unde fined on input line 241. LaTeX Warning: Reference `general_introduction:label-jfh5' on page 8 undefined on input line 241. [8 <./Data_Struct_JF.png (PNG copy)>] LaTeX Warning: Hyper reference `general_introduction:label-gs' on page 9 undefi ned on input line 280. LaTeX Warning: Reference `general_introduction:label-gs' on page 9 undefined on input line 280. [9 <./m039_CS_DGS.png>] LaTeX Warning: Hyper reference `jf_correction:data-correction' on page 10 undef ined on input line 329. [10] Chapter 2. LaTeX Warning: Hyper reference `setup:label-sls-arch' on page 11 undefined on i nput line 356. LaTeX Warning: Reference `setup:label-sls-arch' on page 11 undefined on input l ine 356. [11] [12 <./sls_architecture.png>] LaTeX Warning: Hyper reference `setup:label-cont-conf' on page 13 undefined on input line 434. LaTeX Warning: Reference `setup:label-cont-conf' on page 13 undefined on input line 434. LaTeX Warning: Hyper reference `setup:label-rec-conf' on page 13 undefined on i nput line 450. LaTeX Warning: Reference `setup:label-rec-conf' on page 13 undefined on input l ine 450. [13 <./JF_Control_NetwConf.png> <./JF_Receiver_TCPport.png>] LaTeX Warning: Hyper reference `setup:label-cont-conf' on page 14 undefined on input line 454. LaTeX Warning: Reference `setup:label-cont-conf' on page 14 undefined on input line 454. LaTeX Warning: Hyper reference `setup:device-configuration' on page 14 undefine d on input line 480. LaTeX Warning: Hyper reference `setup:label-cont-detv' on page 14 undefined on input line 486. LaTeX Warning: Reference `setup:label-cont-detv' on page 14 undefined on input line 486. [14] [15 <./JF_Cont_DetV_Circle.png>] [16] Chapter 3. [17] LaTeX Warning: Hyper reference `operation:label-vd' on page 18 undefined on inp ut line 554. LaTeX Warning: Reference `operation:label-vd' on page 18 undefined on input lin e 554. LaTeX Warning: Hyper reference `operation:basic-operation' on page 18 undefined on input line 556. [18 <./jungfrau_devices.png>] LaTeX Warning: Hyper reference `operation:label-vd' on page 19 undefined on inp ut line 634. LaTeX Warning: Reference `operation:label-vd' on page 19 undefined on input lin e 634. [19 <./JF1M_boards.jpg>] [20] [21] LaTeX Warning: Hyper reference `troubleshooting:label-stripes' on page 22 undef ined on input line 843. LaTeX Warning: Reference `troubleshooting:label-stripes' on page 22 undefined o n input line 843. [22] Chapter 4. [23] [24] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) LaTeX Warning: Hyper reference `general_introduction:raw-data-output' on page 2 5 undefined on input line 1086. LaTeX Warning: Hyper reference `jf_correction:label-jfh5corr' on page 25 undefi ned on input line 1097. LaTeX Warning: Reference `jf_correction:label-jfh5corr' on page 25 undefined on input line 1097. [25] [26 <./m039_Ped_G0.png>] [27 <./m039_Ped_G1.png>] [28 <./m039_Ped_G2.png>] [29 <./JF_Corr_Data.png>] LaTeX Warning: Hyper reference `general_introduction:raw-data-output' on page 3 0 undefined on input line 1102. [30] Chapter 5. LaTeX Warning: Hyper reference `general_introduction:label-jf' on page 31 undef ined on input line 1148. LaTeX Warning: Reference `general_introduction:label-jf' on page 31 undefined o n input line 1148. [31] LaTeX Warning: Hyper reference `troubleshooting:label-ode' on page 32 undefined on input line 1231. LaTeX Warning: Reference `troubleshooting:label-ode' on page 32 undefined on in put line 1231. LaTeX Warning: Float too large for page by 14.98624pt on input line 1238. LaTeX Warning: Hyper reference `troubleshooting:label-packet-l' on page 32 unde fined on input line 1251. LaTeX Warning: Reference `troubleshooting:label-packet-l' on page 32 undefined on input line 1251. LaTeX Warning: Hyper reference `troubleshooting:label-stripes' on page 32 undef ined on input line 1264. LaTeX Warning: Reference `troubleshooting:label-stripes' on page 32 undefined o n input line 1264. LaTeX Warning: Hyper reference `troubleshooting:label-heat' on page 32 undefine d on input line 1288. LaTeX Warning: Reference `troubleshooting:label-heat' on page 32 undefined on i nput line 1288. [32] [33 <./JF_Receiver_OnlineDisplEn.png>] [34 <./JF_PacketLoss.png> <./R0881_ Img55_ADC.png>] LaTeX Warning: Hyper reference `troubleshooting:label-dhn' on page 35 undefined on input line 1344. LaTeX Warning: Reference `troubleshooting:label-dhn' on page 35 undefined on in put line 1344. LaTeX Warning: Hyper reference `troubleshooting:label-tn' on page 35 undefined on input line 1345. LaTeX Warning: Reference `troubleshooting:label-tn' on page 35 undefined on inp ut line 1345. LaTeX Warning: Hyper reference `troubleshooting:label-rb' on page 35 undefined on input line 1348. LaTeX Warning: Reference `troubleshooting:label-rb' on page 35 undefined on inp ut line 1348. [35 <./JUNGFRAU_Overheating.png>] LaTeX Warning: Hyper reference `troubleshooting:label-ping' on page 36 undefine d on input line 1383. LaTeX Warning: Reference `troubleshooting:label-ping' on page 36 undefined on i nput line 1383. [36 <./JF_Control_DeviceServers.png> <./JF_Control_detHostName.png> <./telnet_b lackfin_smudged.png>] LaTeX Warning: Hyper reference `general_introduction:label-jf' on page 37 undef ined on input line 1406. LaTeX Warning: Reference `general_introduction:label-jf' on page 37 undefined o n input line 1406. No file jungfrau-detector-documentation.ind. [37 <./reboot_blackfin_smudged.png> <./ping_bchip_output_cut.png>] (./jungfrau-detector-documentation.aux) Package rerunfilecheck Warning: File `jungfrau-detector-documentation.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ){/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc} Output written on jungfrau-detector-documentation.pdf (41 pages, 15956492 bytes ). Transcript written on jungfrau-detector-documentation.log. Latexmk: Index file 'jungfrau-detector-documentation.idx' was written Latexmk: Missing input file: 'jungfrau-detector-documentation.ind' from line 'No file jungfrau-detector-documentation.ind.' Latexmk: References changed. Latexmk: References changed. Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Latexmk: List of undefined refs and citations: Reference `general_introduction:label-gs' on page 9 undefined on input line 280 Reference `general_introduction:label-jf' on page 31 undefined on input line 1148 Reference `general_introduction:label-jf' on page 37 undefined on input line 1406 Reference `general_introduction:label-jf' on page 4 undefined on input line 164 Reference `general_introduction:label-jf-tr' on page 4 undefined on input line 163 Reference `general_introduction:label-jfb' on page 3 undefined on input line 128 Reference `general_introduction:label-jfh5' on page 8 undefined on input line 241 Reference `jf_correction:label-jfh5corr' on page 25 undefined on input line 1097 Reference `operation:label-vd' on page 18 undefined on input line 554 Reference `operation:label-vd' on page 19 undefined on input line 634 Reference `setup:label-cont-conf' on page 13 undefined on input line 434 Reference `setup:label-cont-conf' on page 14 undefined on input line 454 Reference `setup:label-cont-detv' on page 14 undefined on input line 486 Reference `setup:label-rec-conf' on page 13 undefined on input line 450 Reference `setup:label-sls-arch' on page 11 undefined on input line 356 Reference `troubleshooting:label-dhn' on page 35 undefined on input line 1344 Reference `troubleshooting:label-heat' on page 32 undefined on input line 1288 Reference `troubleshooting:label-ode' on page 32 undefined on input line 1231 Reference `troubleshooting:label-packet-l' on page 32 undefined on input line 1251 Reference `troubleshooting:label-ping' on page 36 undefined on input line 1383 Reference `troubleshooting:label-rb' on page 35 undefined on input line 1348 Reference `troubleshooting:label-stripes' on page 22 undefined on input line 843 Reference `troubleshooting:label-stripes' on page 32 undefined on input line 1264 Reference `troubleshooting:label-tn' on page 35 undefined on input line 1345 Latexmk: Summary of warnings: Latex failed to resolve 24 reference(s) Rule 'makeindex jungfrau-detector-documentation.idx': File changes, etc: Non-existent destination files: 'jungfrau-detector-documentation.ind' ------------ Run number 1 of rule 'makeindex jungfrau-detector-documentation.idx' ------------ ------------ Running 'makeindex -s python.ist -o "jungfrau-detector-documentation.ind" "jungfrau-detector-documentation.idx"' ------------ Latexmk: applying rule 'makeindex jungfrau-detector-documentation.idx'... This is makeindex, version 2.15 [TeX Live 2017] (kpathsea + Thai support). Scanning style file ./python.ist.......done (7 attributes redefined, 0 ignored). Scanning input file jungfrau-detector-documentation.idx...done (0 entries accepted, 0 rejected). Nothing written in jungfrau-detector-documentation.ind. Transcript written in jungfrau-detector-documentation.ilg. Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'jungfrau-detector-documentation.aux' 'jungfrau-detector-documentation.ind' ------------ Run number 2 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="jungfrau-detector-documentation" "Jungfraudocumentation.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./Jungfraudocumentation.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2018/12/22 v1.8.3 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) Writing index file jungfrau-detector-documentation.idx (./jungfrau-detector-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./jungfrau-detector-documentation.out) (./jungfrau-detector-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./jungfrau-detector-documentation.toc [1]) [2] [1] [2] Chapter 1. [3] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) [4 <./JF_Eval_Fr ont_2.jpg>] [5 <./JF_Eval_Board.jpg>] [6 <./JF_Trigger_Board.jpg>] [7 <./JF_Mod ule_Connectors.jpg>] [8 <./Data_Struct_JF.png (PNG copy)>] [9 <./m039_CS_DGS.pn g>] [10] Chapter 2. [11] [12 <./sls_architecture.png>] [13 <./JF_Control_NetwConf.png> <./JF_Receiv er_TCPport.png>] [14] [15 <./JF_Cont_DetV_Circle.png>] [16] Chapter 3. [17] [18 <./jungfrau_devices.png>] [19 <./JF1M_boards.jpg>] [20] [21] [22] Chapter 4. [23] [24] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [25] [26 <./m039_Ped_G0.png>] [27 <./m039_Ped_G1.png>] [28 <./m039_Ped_G2.png>] [29 <./JF_Corr_Data.png>] [30] Chapter 5. [31] LaTeX Warning: Float too large for page by 14.98624pt on input line 1238. [32] [33 <./JF_Receiver_OnlineDisplEn.png>] [34 <./JF_PacketLoss.png> <./R0881_ Img55_ADC.png>] [35 <./JUNGFRAU_Overheating.png>] [36 <./JF_Control_DeviceServe rs.png> <./JF_Control_detHostName.png> <./telnet_blackfin_smudged.png>] (./jungfrau-detector-documentation.ind) [37 <./reboot_blackfin_smudged.png> <./ ping_bchip_output_cut.png>] (./jungfrau-detector-documentation.aux) ){/usr/shar e/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc} Output written on jungfrau-detector-documentation.pdf (41 pages, 15965073 bytes ). Transcript written on jungfrau-detector-documentation.log. Latexmk: Index file 'jungfrau-detector-documentation.idx' was written Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'jungfrau-detector-documentation.out' 'jungfrau-detector-documentation.toc' ------------ Run number 3 of rule 'pdflatex' ------------ Latexmk: applying rule 'pdflatex'... ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="jungfrau-detector-documentation" "Jungfraudocumentation.tex"' ------------ This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./Jungfraudocumentation.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2018/12/22 v1.8.3 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) Writing index file jungfrau-detector-documentation.idx (./jungfrau-detector-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./jungfrau-detector-documentation.out) (./jungfrau-detector-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./jungfrau-detector-documentation.toc [1]) [2] [1] [2] Chapter 1. [3] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) [4 <./JF_Eval_Fr ont_2.jpg>] [5 <./JF_Eval_Board.jpg>] [6 <./JF_Trigger_Board.jpg>] [7 <./JF_Mod ule_Connectors.jpg>] [8 <./Data_Struct_JF.png (PNG copy)>] [9 <./m039_CS_DGS.pn g>] [10] Chapter 2. [11] [12 <./sls_architecture.png>] [13 <./JF_Control_NetwConf.png> <./JF_Receiv er_TCPport.png>] [14] [15 <./JF_Cont_DetV_Circle.png>] [16] Chapter 3. [17] [18 <./jungfrau_devices.png>] [19 <./JF1M_boards.jpg>] [20] [21] [22] Chapter 4. [23] [24] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [25] [26 <./m039_Ped_G0.png>] [27 <./m039_Ped_G1.png>] [28 <./m039_Ped_G2.png>] [29 <./JF_Corr_Data.png>] [30] Chapter 5. [31] LaTeX Warning: Float too large for page by 14.98624pt on input line 1238. [32] [33 <./JF_Receiver_OnlineDisplEn.png>] [34 <./JF_PacketLoss.png> <./R0881_ Img55_ADC.png>] [35 <./JUNGFRAU_Overheating.png>] [36 <./JF_Control_DeviceServe rs.png> <./JF_Control_detHostName.png> <./telnet_blackfin_smudged.png>] (./jungfrau-detector-documentation.ind) [37 <./reboot_blackfin_smudged.png> <./ ping_bchip_output_cut.png>] (./jungfrau-detector-documentation.aux) ){/usr/shar e/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc} Output written on jungfrau-detector-documentation.pdf (41 pages, 15965073 bytes ). Transcript written on jungfrau-detector-documentation.log. Latexmk: Index file 'jungfrau-detector-documentation.idx' was written Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Latexmk: Log file says output to 'jungfrau-detector-documentation.pdf' Latexmk: All targets (jungfrau-detector-documentation.pdf) are up-to-date [rtd-command-info] start-time: 2024-03-07T16:00:34.239922Z, end-time: 2024-03-07T16:00:34.372993Z, duration: 0, exit-code: 0 mv -f /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/_build/latex/jungfrau-detector-documentation.pdf /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/artifacts/latest/sphinx_pdf/jungfrau-detector-documentation.pdf [rtd-command-info] start-time: 2024-03-07T16:00:34.462941Z, end-time: 2024-03-07T16:00:36.744171Z, duration: 2, exit-code: 0 python /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/envs/latest/bin/sphinx-build -T -b epub -d _build/doctrees-epub -D language=en . _build/epub Running Sphinx v1.8.6 loading translations [en]... done making output directory... loading intersphinx inventory from https://docs.python.org/objects.inv... intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv building [mo]: targets for 0 po files that are out of date building [epub]: targets for 6 source files that are out of date updating environment: 6 added, 0 changed, 0 removed reading sources... [ 16%] general_introduction reading sources... [ 33%] index reading sources... [ 50%] jf_correction reading sources... [ 66%] operation reading sources... [ 83%] setup reading sources... [100%] troubleshooting /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/jf_correction.rst:60: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:89: WARNING: Unexpected indentation. /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/troubleshooting.rst:90: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 16%] general_introduction writing output... [ 33%] index writing output... [ 50%] jf_correction writing output... [ 66%] operation writing output... [ 83%] setup writing output... [100%] troubleshooting generating indices... genindex writing additional pages... copying images... [ 4%] pics/JF_Eval_Front_2.jpg copying images... [ 8%] pics/JF_Eval_Board.jpg copying images... [ 12%] pics/JF_Trigger_Board.jpg copying images... [ 16%] pics/JF_Module_Connectors.jpg copying images... [ 20%] pics/Data_Struct_JF.png copying images... [ 24%] pics/m039_CS_DGS.png copying images... [ 28%] pics/m039_Ped_G0.png copying images... [ 32%] pics/m039_Ped_G1.png copying images... [ 36%] pics/m039_Ped_G2.png copying images... [ 40%] pics/JF_Corr_Data.png copying images... [ 44%] pics/jungfrau_devices.png copying images... [ 48%] pics/JF1M_boards.jpg copying images... [ 52%] pics/sls_architecture.png copying images... [ 56%] pics/JF_Control_NetwConf.png copying images... [ 60%] pics/JF_Receiver_TCPport.png copying images... [ 64%] pics/JF_Cont_DetV_Circle.png copying images... [ 68%] pics/JF_Receiver_OnlineDisplEn.png copying images... [ 72%] pics/JF_PacketLoss.png copying images... [ 76%] pics/R0881_Img55_ADC.png copying images... [ 80%] pics/JUNGFRAU_Overheating.png copying images... [ 84%] pics/JF_Control_DeviceServers.png copying images... [ 88%] pics/JF_Control_detHostName.png copying images... [ 92%] pics/telnet_blackfin_smudged.png copying images... [ 96%] pics/reboot_blackfin_smudged.png copying images... [100%] pics/ping_bchip_output_cut.png copying static files... WARNING: html_static_path entry '/usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/_static' does not exist done copying extra files... done writing mimetype file... writing META-INF/container.xml file... writing content.opf file... writing nav.xhtml file... writing toc.ncx file... writing Jungfraudocumentation.epub file... build succeeded, 4 warnings. The ePub file is in _build/epub. [rtd-command-info] start-time: 2024-03-07T16:00:36.831906Z, end-time: 2024-03-07T16:00:37.126563Z, duration: 0, exit-code: 0 mv -f /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/checkouts/latest/source/_build/epub/Jungfraudocumentation.epub /usr/src/app/checkouts/readthedocs.org/user_builds/jungfrau-detector-documentation/artifacts/latest/sphinx_epub/jungfrau-detector-documentation.epub