.. _image-two-peak-finder-user: *************** Two Peak Finder *************** The `TwoPeakFinder` device will integrate the input image in the vertical direction, then find two peaks, one left and one right from the `zero_point`. .. _image-two-peak-finder-settings: Input to the Device =================== ======================= ======================================================= Property key Description ======================= ======================================================= zeroPoint | The device will try to find a peak left, and a peak | right, from this point. threshold | TODO - currently unused. roi | The user-defined region of interest (ROI), specified | as [lowX, highX]. | [0, 0] will be interpreted as 'whole range'. ======================= ======================================================= Commands ======== ======================= ======================================================= Slot key Description ======================= ======================================================= reset | Reset error count. ======================= ======================================================= Output of the Device ==================== ======================= ======================================================= Property key Description ======================= ======================================================= frameRate | The rate of incoming and outgoing images. It is | refreshed once per second. errorCount | Number of errors. peak1Value | Amplitude of the 1st peak. peak1Position | Position of the 1st peak. peak1Fwhm | FWHM of the 1st peak. peak2Value | Amplitude of the 2nd peak. peak2Position | Position of the 2nd peak. peak2Fwhm | FWHM of the 2nd peak. ======================= =======================================================